Covering Ruislip and nearby
We do not keep premises in Ruislip. Instead, enquiries about automatic swing doors come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the HA4 postcode district on a date that suits the site.
Many London entrances can only be worked on outside trading hours. For sites in Ruislip, early starts, evenings and weekends can be arranged, with any extra cost set out in the written price before the job is confirmed.
Nearby towns we also list for automatic swing doors (straight-line distance): Uxbridge (3.0 miles), Harrow (3.9 miles), Hayes (4.0 miles), Greenford (4.3 miles), Southall (5.0 miles), Rickmansworth (5.1 miles).
What to think about for automatic swing doors in Ruislip
- External swing doors facing the wind need stronger operators and careful set-up. On exposed sites across Greater London, consider whether a canopy or a sliding door would work better.
- Toilet and changing room doors used by disabled people may suit a low-energy operator instead. The survey compares the options based on how busy the door is and who uses it.
- Doors that open into a corridor can strike people approaching from the side. Guard rails or extra sensors may be needed where the swing area meets a busy route.
- Electric locks must be coordinated with the operator, so the lock releases before the arm moves. Tell us about existing locks, card readers and intercoms at the survey.
- Check the hinges first. Older doors in Ruislip often have worn hinges that would fail under an operator, so the survey may recommend heavier hinges or pivots.
Automatic swing doors in Ruislip: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Ruislip.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Book a free survey in Ruislip, and an engineer will check your doors, hinges and fire labels and recommend the right operator.
Automatic swing doors in Ruislip: questions
Do you fit low-energy operators in Ruislip as well?
Yes. Where a door is quieter and used mainly by people who need help opening it, a low-energy operator may be the better choice, as long as a risk assessment shows it is suitable. We compare full-energy and low-energy at the survey and explain the difference in the quote.
How much should I budget for automatic swing doors in Ruislip?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Ruislip confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you service swing doors in Ruislip after fitting?
Yes. We can arrange planned servicing, with each visit priced in writing before an engineer attends. A trained engineer should check the safety functions at least once a year, and busy corridors, schools and hospitals usually need more frequent visits. Staff should also carry out simple daily checks.
Can our existing doors in Ruislip be automated?
Usually, if the doors, hinges and frames are in good condition. The survey checks the door weight, the hinges, what the operator will fix to and what sits in the swing path. Where a door is too worn, we will say so and quote a new doorset with the operator fitted instead.
Do you service doors in Ruislip after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
What is the lead time for automatic swing doors in Ruislip?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Do businesses in Ruislip have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.