Covering Dagenham and nearby
We do not keep premises in Dagenham. Instead, enquiries about automatic swing doors come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the RM10 postcode district on a date that suits the site.
Security matters on busy London streets, so entrances in Dagenham often need doors that lock firmly at night and work with alarms, shutters or access control. The operator, the locking and any shutter are planned together so they work in the right order.
Nearby towns we also list for automatic swing doors (straight-line distance): Romford (1.9 miles), Hornchurch (2.2 miles), Barking (3.8 miles), Thamesmead (3.8 miles), Ilford (4.1 miles), Erith (4.6 miles).
What to think about for automatic swing doors in Dagenham
- Doors that open into a corridor can strike people approaching from the side. Guard rails or extra sensors may be needed where the swing area meets a busy route.
- Double doors with rebated meeting edges need operators that open and close in sequence. The engineer sets this up so the leaves never clash or leave a gap when closed.
- Electric locks must be coordinated with the operator, so the lock releases before the arm moves. Tell us about existing locks, card readers and intercoms at the survey.
- Schools in Dagenham often prefer installation during half-term or the summer holidays. Operators are typically 2 to 4 weeks from order, so book the survey a few weeks before the break.
- Office buildings in Dagenham with access control can have doors that open automatically in working hours and only for card holders after hours, using a timer and the existing reader.
Automatic swing doors in Dagenham: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Dagenham.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
For corridor, office or school doors in Dagenham, send us photos and door sizes and we will plan the right swing operators.
Automatic swing doors in Dagenham: questions
What paperwork do we get for automated doors in Dagenham?
You receive the test record, a site-specific risk assessment, user instructions and the conformity paperwork for each door. When an existing manual door is motorised, whoever does it may take on the manufacturer's duties for the finished door, so the Declaration of Conformity and instructions are handed over at the end of the job.
What is the guide price for automatic swing doors in Dagenham?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Dagenham confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will the swing operator in Dagenham work with our fire alarm?
It can. Fire doors that are held open must close automatically when the fire alarm operates, and the operator can be linked to the alarm to do this. Other doors can be set to open on alarm where the fire strategy needs it. Your alarm engineer usually makes the panel connection.
Can you fit automatic swing door operators in Dagenham?
Yes. We arrange supply and installation of swing operators for doors in Dagenham and throughout Greater London. The work is carried out by specialist automatic door engineers working under our management, and we stay the contracting party from the survey through to handover and any servicing afterwards.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Dagenham is agreed before work starts.
What happens once the installation in Dagenham is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Which building regulations apply to a new automatic entrance in Dagenham?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.