UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic swing doors · East Riding of Yorkshire

Automatic swing doors in Hull

Automating an existing swing door in Hull is often quicker and cheaper than replacing it. We check that the door and frame are sound, then quote a fixed price for the operator, sensors, wiring and set-up.

Town
Hull
Area
East Riding of Yorkshire
Postcodes
HU1, HU2, HU3, HU4, HU5, HU8
Guide price
From £2,495 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Hull and nearby

For automatic swing doors, coverage around Hull is set by postcode and includes the HU1, HU2, HU3, HU4, HU5 and HU8 postcode districts, as well as nearby addresses in the East Riding of Yorkshire. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.

Mixed-use buildings in Hull, with shops at street level and offices or flats above, often share an entrance or a fire route. Doors in those settings have to suit several users at once, and the managing agent or landlord is usually involved in approving work.

Nearby towns we also list for automatic swing doors (straight-line distance): Cottingham (4.1 miles), Beverley (7.9 miles), Goole (22.3 miles), Bridlington (24.1 miles), Thorne (27.3 miles), Selby (30.0 miles).

What to think about for automatic swing doors in Hull

  • Hospital and care home corridors in Hull need doors that open early enough for beds and trolleys. Radar sensors set to the right range, or a push pad placed before the door, keep traffic moving.
  • Toilet and changing room doors used by disabled people may suit a low-energy operator instead. The survey compares the options based on how busy the door is and who uses it.
  • Office buildings in Hull with access control can have doors that open automatically in working hours and only for card holders after hours, using a timer and the existing reader.
  • Fire doors need care. The operator must suit the door, keep its fire performance intact and close the door when the alarm sounds, so have the door's labels and records to hand for the survey.
  • Doors that open into a corridor can strike people approaching from the side. Guard rails or extra sensors may be needed where the swing area meets a busy route.

Automatic swing doors in Hull: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.

ItemGuide priceNotes
Full-energy operator on an existing single door, with safety sensors£2,495 – £3,995installed, ex VAT
Operators on an existing pair of doors£3,795 – £6,495installed, ex VAT
New single automatic swing door set (door, frame and operator)£3,495 – £6,495installed, ex VAT
New double automatic swing door set£7,995 – £9,995installed, ex VAT
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT

Standards and rules in England

Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic swing doors and book a survey in Hull.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

For corridor, office or school doors in Hull, send us photos and door sizes and we will plan the right swing operators.

Automatic swing doors in Hull: questions

Can you fit automatic swing door operators in Hull?

Yes. We arrange supply and installation of swing operators for doors in Hull and throughout the East Riding of Yorkshire. The work is carried out by specialist automatic door engineers working under our management, and we stay the contracting party from the survey through to handover and any servicing afterwards.

How are prices worked out for automatic swing doors in Hull?

Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Hull confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Will the swing operator in Hull work with our fire alarm?

It can. Fire doors that are held open must close automatically when the fire alarm operates, and the operator can be linked to the alarm to do this. Other doors can be set to open on alarm where the fire strategy needs it. Your alarm engineer usually makes the panel connection.

How quickly can a swing operator be fitted in Hull?

Operators for existing doors are typically 2 to 4 weeks from order. On site, a single door usually takes half a day to a day, and a pair about a day. We can plan work for evenings, weekends or holidays where the building is busy, with any extra cost shown in the quote.

How much disruption should we expect while the work is done in Hull?

Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.

What power supply is needed for automatic swing doors in Hull?

Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.

Do businesses in Hull have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Automatic swing doors in Hull

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.