Covering Bedminster and nearby
From shops and surgeries to schools, care homes and private houses, any building in the BS3 postcode district can be covered for automatic swing doors. Specialist engineers working under our management carry out the work, and you deal with us as the contracting party from start to finish.
Small offices, community centres and village halls around Bedminster tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for automatic swing doors (straight-line distance): Bristol (1.2 miles), Clifton (1.7 miles), Kingswood (4.2 miles), Fishponds (4.5 miles), Keynsham (4.9 miles), Nailsea (6.7 miles).
What to think about for automatic swing doors in Bedminster
- Doors on escape routes in Bedminster usually open in the direction of escape. If the current door opens the other way, the survey will flag whether it should be changed before the operator is fitted.
- Toilet and changing room doors used by disabled people may suit a low-energy operator instead. The survey compares the options based on how busy the door is and who uses it.
- Doors that open into a corridor can strike people approaching from the side. Guard rails or extra sensors may be needed where the swing area meets a busy route.
- Office buildings in Bedminster with access control can have doors that open automatically in working hours and only for card holders after hours, using a timer and the existing reader.
- Double doors with rebated meeting edges need operators that open and close in sequence. The engineer sets this up so the leaves never clash or leave a gap when closed.
Automatic swing doors in Bedminster: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £2,495 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Full-energy operator on an existing single door, with safety sensors | £2,495 – £3,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| New single automatic swing door set (door, frame and operator) | £3,495 – £6,495 | installed, ex VAT |
| New double automatic swing door set | £7,995 – £9,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Describe what you need. Whether the job is automatic swing doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Bedminster.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Tell us how many doors you have in Bedminster, and whether they are single or double, and we will arrange a free survey.
Automatic swing doors in Bedminster: questions
Can you service swing doors in Bedminster after fitting?
Yes. We can arrange planned servicing, with each visit priced in writing before an engineer attends. A trained engineer should check the safety functions at least once a year, and busy corridors, schools and hospitals usually need more frequent visits. Staff should also carry out simple daily checks.
What price range should I expect for automatic swing doors in Bedminster?
Our guide starts from £2,495 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Bedminster confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Is the survey for swing doors in Bedminster free?
Yes, for new operators and doorsets the survey is free and carries no obligation. The engineer looks at each door, its hinges, frame, locks, power and fire labels, and you receive a fixed, itemised written quote for the work. Each door is priced separately, so the work can be phased if needed.
What paperwork do we get for automated doors in Bedminster?
You receive the test record, a site-specific risk assessment, user instructions and the conformity paperwork for each door. When an existing manual door is motorised, whoever does it may take on the manufacturer's duties for the finished door, so the Declaration of Conformity and instructions are handed over at the end of the job.
What do you need from us for parking and access in Bedminster?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Do I need permission from a landlord or the council before work in Bedminster?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Do businesses in Bedminster have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.