Covering Maltby and nearby
Addresses anywhere in the S66 postcode district can book automatic sliding doors through us. The engineer who attends works under our management and travels to the site. There is no branch in Maltby, so the price, the booking and the paperwork all come from one place.
In Maltby, automatic door needs often centre on the high street: independent shops, pharmacies, banks, cafés and estate agents. Frontages are often narrow, so the choice is usually between a compact sliding door, a folding door or a swing operator on the existing door.
Nearby towns we also list for automatic sliding doors (straight-line distance): Rotherham (6.5 miles), Rawmarsh (6.7 miles), Doncaster (7.9 miles), Worksop (8.5 miles), Sheffield (11.2 miles), Chapeltown (11.7 miles).
What to think about for automatic sliding doors in Maltby
- Surgeries and clinics need wide, easy access for wheelchairs, walking frames and the occasional stretcher. A clear opening of at least 1,000 mm is, in our view, a sensible starting point, and wider still where trolleys or beds pass through.
- Entrances in Maltby that sit on an escape route need the fire strategy checked before the door is designed, because that decides whether break-out leaves, alarm-linked opening or battery opening are required.
- Wind blowing straight at an entrance can make sliding leaves drag or cause the door to open when nobody is there. On exposed frontages across South Yorkshire, a partial opening mode or a draught lobby is worth considering.
- Shops that use a roller shutter at night need the new header to sit below the shutter box and clear of its guide channels. Both are measured at survey so the door and shutter can work together.
- A sloping pavement or uneven threshold in front of a door in Maltby can stop floor guides working properly. The survey records floor levels, so any levelling is included in the quote rather than discovered on the day.
Automatic sliding doors in Maltby: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £4,495 to £12,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide door set, about 1.0 to 1.2 m clear opening | £4,495 – £7,995 | framed aluminium and glass, installed, ex VAT |
| Bi-parting door set, about 2 m clear opening, with side screens | £6,995 – £12,995 | installed, ex VAT |
| Large, full-height or heavy-duty entrances | from £14,995 | Priced on survey |
| Break-out leaves and screens for an escape route | £995 – £3,995 | added to a sliding door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Maltby.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Use the guide price tool for a quick figure, then book a free survey in Maltby to turn it into a fixed written price you can plan around.
Automatic sliding doors in Maltby: questions
Do we need consent for a new entrance in Maltby?
It depends on the building. A change to how a shopfront looks may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. We flag the question at survey and can provide drawings and product details to support an application if one is needed.
What will automatic sliding doors in Maltby cost?
Our guide is £4,495 to £12,995 excluding VAT (per door set), the same guide prices we use across the UK. The free site survey in Maltby confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Who checks that a new sliding door in Maltby is safe?
The installing engineer sets the speeds, forces and sensor zones, tests the door and completes a site-specific risk assessment before handing it over. You keep the test record and the risk assessment for your own files, and they form the baseline for every service visit and inspection after that.
How long will the doorway in Maltby be out of action?
For a straightforward replacement, the opening is usually secure again by the end of the first day, with the door fully working by the end of the second. Larger shopfront changes take longer. How the doorway will be kept safe and secure overnight is agreed with you before work starts.
Is there a warranty on automatic sliding doors?
Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.
What power supply is needed for automatic sliding doors in Maltby?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Who is responsible for automatic doors on escape routes in Maltby?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.