Covering Barry and nearby
We cover the whole of the CF62 and CF63 postcode districts, along with nearby towns in South Glamorgan. You book each visit for automatic sliding doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Around Barry there is usually a mix of retail parks, business parks and town-centre shops, each with different door needs. A retail park unit may need a wide bi-parting door for trolleys, while a town-centre shop often has a narrow frontage better suited to a single slider or a folding door.
Nearby towns we also list for automatic sliding doors (straight-line distance): Penarth (5.5 miles), Cardiff (7.1 miles), Llantwit Major (8.8 miles), Caerphilly (12.4 miles), Pencoed (12.7 miles), Pontypridd (14.2 miles).
What to think about for automatic sliding doors in Barry
- A sloping pavement or uneven threshold in front of a door in Barry can stop floor guides working properly. The survey records floor levels, so any levelling is included in the quote rather than discovered on the day.
- Power is needed near the head of the door, usually from a fused spur. If there is no supply nearby, allow for an electrician to run one before the fitting day so the door can be commissioned straight away.
- Business park offices around Barry often have a reception door that is busy for an hour each morning and quiet for the rest of the day. A timer on the programme switch can lock it out of hours without anyone remembering to.
- Shops that use a roller shutter at night need the new header to sit below the shutter box and clear of its guide channels. Both are measured at survey so the door and shutter can work together.
- Wind blowing straight at an entrance can make sliding leaves drag or cause the door to open when nobody is there. On exposed frontages across South Glamorgan, a partial opening mode or a draught lobby is worth considering.
Automatic sliding doors in Barry: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £4,495 to £12,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide door set, about 1.0 to 1.2 m clear opening | £4,495 – £7,995 | framed aluminium and glass, installed, ex VAT |
| Bi-parting door set, about 2 m clear opening, with side screens | £6,995 – £12,995 | installed, ex VAT |
| Large, full-height or heavy-duty entrances | from £14,995 | Priced on survey |
| Break-out leaves and screens for an escape route | £995 – £3,995 | added to a sliding door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in Wales
Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic sliding doors and book a survey in Barry.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Send us a photo of the doorway and its postcode, and we will arrange a free site survey in Barry and a fixed, itemised quote for a new sliding entrance.
Automatic sliding doors in Barry: questions
Do you install automatic sliding doors in Barry?
Yes. We arrange supply and installation throughout South Glamorgan, with the work carried out by specialist automatic door engineers working under our management who travel to the site for the survey and the fitting. You deal with one contracting party from quote to handover, and the same arrangement can cover servicing afterwards if you want it.
How are prices worked out for automatic sliding doors in Barry?
Our guide is £4,495 to £12,995 excluding VAT (per door set), the same guide prices we use across the UK. The free site survey in Barry confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Who checks that a new sliding door in Barry is safe?
The installing engineer sets the speeds, forces and sensor zones, tests the door and completes a site-specific risk assessment before handing it over. You keep the test record and the risk assessment for your own files, and they form the baseline for every service visit and inspection after that.
Will a new sliding door in Barry work with our alarm and access control?
In most cases, yes. The operator can take signals from a fire alarm panel, a card reader, a keypad, an intercom or a timer. Tell us what you have at the survey, and the quote will show the interface work and who is responsible for each connection, whether that is us, your electrician or your alarm company.
Can automatic doors be fitted to a listed building in Barry?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Can installation in Barry happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
Do businesses in Barry have to fit automatic doors?
There is no blanket requirement. Service providers and employers must make reasonable adjustments for disabled people under the Equality Act 2010, and Welsh building regulations guidance expects entrances that are easy to open. An automatic door is a common way to meet both.