Coverage across Powys
Booking automatic sliding doors in Powys does not depend on being close to a particular town. Engineers working under our management travel throughout the area, and nothing goes ahead until the price has been agreed in writing. Below are the towns we list here, 3 at present, each linking to a page with nearby places and guide prices.
Towns listed in Powys: Newtown, Brecon, Welshpool.
What to think about for automatic sliding doors in Powys
- Care settings in Powys sometimes need a sliding entrance that visitors can use freely while some residents cannot leave unaccompanied. Keypads and programme modes can be set to follow the home's own care policies.
- Older shopfronts in Powys often have a timber or steel frame that was never designed to carry a sliding door header. The survey checks what sits above the opening and whether new support is needed before anything is ordered.
- A sloping pavement or uneven threshold in front of a door in Powys can stop floor guides working properly. The survey records floor levels, so any levelling is included in the quote rather than discovered on the day.
- Shops that use a roller shutter at night need the new header to sit below the shutter box and clear of its guide channels. Both are measured at survey so the door and shutter can work together.
- Where a building in Powys is listed or sits in a conservation area, a new entrance may need consent first. Slim frames, a colour matched to the existing shopfront and careful drawings can all help an application.
Automatic sliding doors in Powys: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £4,495 to £12,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide door set, about 1.0 to 1.2 m clear opening | £4,495 – £7,995 | framed aluminium and glass, installed, ex VAT |
| Bi-parting door set, about 2 m clear opening, with side screens | £6,995 – £12,995 | installed, ex VAT |
| Large, full-height or heavy-duty entrances | from £14,995 | Priced on survey |
| Break-out leaves and screens for an escape route | £995 – £3,995 | added to a sliding door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in Wales
Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic sliding doors and book a survey in Powys.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Book a survey in Powys and an engineer will measure the opening, check the power and floor, and talk you through the sliding layouts that fit.
Automatic sliding doors in Powys: questions
What happens after the sliding door in Powys is fitted?
You get a handover pack with the test record, risk assessment and user instructions, and staff are shown the programme switch. From then on the door needs daily checks and planned servicing. We can quote a service arrangement at intervals based on how much the door is used and the risk.
What do you charge for automatic sliding doors in Powys?
Our guide is £4,495 to £12,995 excluding VAT (per door set), the same guide prices we use across the UK. The free site survey in Powys confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you fit a sliding door in Powys outside our opening hours?
Usually, yes. Many shops and surgeries prefer an early start, an evening or a weekend so the entrance stays open during trading. Out-of-hours work is shown as a separate line in the quote, so you can compare it with a weekday installation and choose whichever suits the business better.
Who checks that a new sliding door in Powys is safe?
The installing engineer sets the speeds, forces and sensor zones, tests the door and completes a site-specific risk assessment before handing it over. You keep the test record and the risk assessment for your own files, and they form the baseline for every service visit and inspection after that.
What power supply is needed for automatic sliding doors in Powys?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Powys is agreed before work starts.
Are the rules for automatic doors different in Wales?
Some are. Wales has its own building regulations guidance: Approved Document M (Wales) calls for a powered door where opening a self-closing entrance door would need more than 20 N, lower than the figure used in England. Fire law (the Regulatory Reform (Fire Safety) Order 2005) and the Equality Act 2010 apply as in England.