Covering Potters Bar and nearby
Homes, businesses and public buildings throughout the EN6 postcode district can arrange automatic sliding doors with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Potters Bar for the job rather than working from premises in town.
Small offices, community centres and village halls around Potters Bar tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.
Nearby towns we also list for automatic sliding doors (straight-line distance): Barnet (3.1 miles), Enfield (4.9 miles), Borehamwood (5.0 miles), Hatfield (5.2 miles), Cheshunt (6.4 miles), Finchley (6.4 miles).
What to think about for automatic sliding doors in Potters Bar
- Power is needed near the head of the door, usually from a fused spur. If there is no supply nearby, allow for an electrician to run one before the fitting day so the door can be commissioned straight away.
- Older shopfronts in Potters Bar often have a timber or steel frame that was never designed to carry a sliding door header. The survey checks what sits above the opening and whether new support is needed before anything is ordered.
- Where a building in Potters Bar is listed or sits in a conservation area, a new entrance may need consent first. Slim frames, a colour matched to the existing shopfront and careful drawings can all help an application.
- Surgeries and clinics need wide, easy access for wheelchairs, walking frames and the occasional stretcher. A clear opening of at least 1,000 mm is, in our view, a sensible starting point, and wider still where trolleys or beds pass through.
- Wind blowing straight at an entrance can make sliding leaves drag or cause the door to open when nobody is there. On exposed frontages across Hertfordshire, a partial opening mode or a draught lobby is worth considering.
Automatic sliding doors in Potters Bar: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £4,495 to £12,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide door set, about 1.0 to 1.2 m clear opening | £4,495 – £7,995 | framed aluminium and glass, installed, ex VAT |
| Bi-parting door set, about 2 m clear opening, with side screens | £6,995 – £12,995 | installed, ex VAT |
| Large, full-height or heavy-duty entrances | from £14,995 | Priced on survey |
| Break-out leaves and screens for an escape route | £995 – £3,995 | added to a sliding door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for automatic sliding doors in Potters Bar, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Ready to replace a heavy door in Potters Bar? Tell us the width, the type of building and how busy it gets, and we will take it from there.
Automatic sliding doors in Potters Bar: questions
Will a new sliding door in Potters Bar work with our alarm and access control?
In most cases, yes. The operator can take signals from a fire alarm panel, a card reader, a keypad, an intercom or a timer. Tell us what you have at the survey, and the quote will show the interface work and who is responsible for each connection, whether that is us, your electrician or your alarm company.
What is the guide price for automatic sliding doors in Potters Bar?
Our guide is £4,495 to £12,995 excluding VAT (per door set), the same guide prices we use across the UK. The free site survey in Potters Bar confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Who checks that a new sliding door in Potters Bar is safe?
The installing engineer sets the speeds, forces and sensor zones, tests the door and completes a site-specific risk assessment before handing it over. You keep the test record and the risk assessment for your own files, and they form the baseline for every service visit and inspection after that.
Do we need consent for a new entrance in Potters Bar?
It depends on the building. A change to how a shopfront looks may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. We flag the question at survey and can provide drawings and product details to support an application if one is needed.
What happens once the installation in Potters Bar is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Do you service doors in Potters Bar after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Do businesses in Potters Bar have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.