Covering Romford and nearby
We cover the whole of the RM1, RM2 and RM7 postcode districts, along with nearby towns in Greater London. You book each visit for automatic sliding doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Office entrances in Romford commonly combine automatic doors with turnstiles, concierge desks and card access. When the operator is wired into those systems, staff pass through quickly, visitors are let in from reception and the building locks down outside working hours.
Nearby towns we also list for automatic sliding doors (straight-line distance): Hornchurch (1.8 miles), Dagenham (1.9 miles), Ilford (5.0 miles), Barking (5.3 miles), Thamesmead (5.7 miles), Brentwood (6.0 miles).
What to think about for automatic sliding doors in Romford
- Older shopfronts in Romford often have a timber or steel frame that was never designed to carry a sliding door header. The survey checks what sits above the opening and whether new support is needed before anything is ordered.
- Wind blowing straight at an entrance can make sliding leaves drag or cause the door to open when nobody is there. On exposed frontages across Greater London, a partial opening mode or a draught lobby is worth considering.
- Care settings in Romford sometimes need a sliding entrance that visitors can use freely while some residents cannot leave unaccompanied. Keypads and programme modes can be set to follow the home's own care policies.
- Shops that use a roller shutter at night need the new header to sit below the shutter box and clear of its guide channels. Both are measured at survey so the door and shutter can work together.
- High street entrances with heavy footfall tend to suit bi-parting leaves. They open faster than a single slide for the same clear width, which keeps queues moving at lunchtime and on Saturday afternoons.
Automatic sliding doors in Romford: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £4,495 to £12,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide door set, about 1.0 to 1.2 m clear opening | £4,495 – £7,995 | framed aluminium and glass, installed, ex VAT |
| Bi-parting door set, about 2 m clear opening, with side screens | £6,995 – £12,995 | installed, ex VAT |
| Large, full-height or heavy-duty entrances | from £14,995 | Priced on survey |
| Break-out leaves and screens for an escape route | £995 – £3,995 | added to a sliding door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Romford and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic sliding doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Ready to replace a heavy door in Romford? Tell us the width, the type of building and how busy it gets, and we will take it from there.
Automatic sliding doors in Romford: questions
Will a new sliding door in Romford work with our alarm and access control?
In most cases, yes. The operator can take signals from a fire alarm panel, a card reader, a keypad, an intercom or a timer. Tell us what you have at the survey, and the quote will show the interface work and who is responsible for each connection, whether that is us, your electrician or your alarm company.
Can you give me a price for automatic sliding doors in Romford?
Our guide is £4,495 to £12,995 excluding VAT (per door set), the same guide prices we use across the UK. The free site survey in Romford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you fit a sliding door in Romford outside our opening hours?
Usually, yes. Many shops and surgeries prefer an early start, an evening or a weekend so the entrance stays open during trading. Out-of-hours work is shown as a separate line in the quote, so you can compare it with a weekday installation and choose whichever suits the business better.
Do we need consent for a new entrance in Romford?
It depends on the building. A change to how a shopfront looks may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. We flag the question at survey and can provide drawings and product details to support an application if one is needed.
What should I send before the survey in Romford?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for automatic sliding doors together more easily.
What power supply is needed for automatic sliding doors in Romford?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Do businesses in Romford have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.