Covering Christchurch and nearby
We cover the whole of the BH23 postcode district, along with nearby towns in Dorset. You book each visit for automatic sliding doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Doors at quieter sites in Christchurch and elsewhere in Dorset can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for automatic sliding doors (straight-line distance): Bournemouth (4.4 miles), New Milton (5.2 miles), Ferndown (7.2 miles), Poole (9.0 miles), Totton (17.9 miles), Hythe (18.7 miles).
What to think about for automatic sliding doors in Christchurch
- Shops that use a roller shutter at night need the new header to sit below the shutter box and clear of its guide channels. Both are measured at survey so the door and shutter can work together.
- Older shopfronts in Christchurch often have a timber or steel frame that was never designed to carry a sliding door header. The survey checks what sits above the opening and whether new support is needed before anything is ordered.
- Care settings in Christchurch sometimes need a sliding entrance that visitors can use freely while some residents cannot leave unaccompanied. Keypads and programme modes can be set to follow the home's own care policies.
- A sloping pavement or uneven threshold in front of a door in Christchurch can stop floor guides working properly. The survey records floor levels, so any levelling is included in the quote rather than discovered on the day.
- Entrances in Christchurch that sit on an escape route need the fire strategy checked before the door is designed, because that decides whether break-out leaves, alarm-linked opening or battery opening are required.
Automatic sliding doors in Christchurch: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £4,495 to £12,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide door set, about 1.0 to 1.2 m clear opening | £4,495 – £7,995 | framed aluminium and glass, installed, ex VAT |
| Bi-parting door set, about 2 m clear opening, with side screens | £6,995 – £12,995 | installed, ex VAT |
| Large, full-height or heavy-duty entrances | from £14,995 | Priced on survey |
| Break-out leaves and screens for an escape route | £995 – £3,995 | added to a sliding door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Christchurch and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic sliding doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Use the guide price tool for a quick figure, then book a free survey in Christchurch to turn it into a fixed written price you can plan around.
Automatic sliding doors in Christchurch: questions
Do you install automatic sliding doors in Christchurch?
Yes. We arrange supply and installation throughout Dorset, with the work carried out by specialist automatic door engineers working under our management who travel to the site for the survey and the fitting. You deal with one contracting party from quote to handover, and the same arrangement can cover servicing afterwards if you want it.
What will automatic sliding doors in Christchurch cost?
Our guide is £4,495 to £12,995 excluding VAT (per door set), the same guide prices we use across the UK. The free site survey in Christchurch confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Who checks that a new sliding door in Christchurch is safe?
The installing engineer sets the speeds, forces and sensor zones, tests the door and completes a site-specific risk assessment before handing it over. You keep the test record and the risk assessment for your own files, and they form the baseline for every service visit and inspection after that.
Do we need consent for a new entrance in Christchurch?
It depends on the building. A change to how a shopfront looks may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. We flag the question at survey and can provide drawings and product details to support an application if one is needed.
Do you service doors in Christchurch after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Can installation in Christchurch happen outside opening hours?
Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.
Which building regulations apply to a new automatic entrance in Christchurch?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.