Covering Exeter and nearby
We do not keep premises in Exeter. Instead, enquiries about automatic sliding doors come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the EX1, EX2 and EX4 postcode districts on a date that suits the site.
Around Exeter there is usually a mix of retail parks, business parks and town-centre shops, each with different door needs. A retail park unit may need a wide bi-parting door for trolleys, while a town-centre shop often has a narrow frontage better suited to a single slider or a folding door.
Nearby towns we also list for automatic sliding doors (straight-line distance): Exmouth (9.2 miles), Tiverton (12.4 miles), Newton Abbot (14.0 miles), Torquay (18.1 miles), Paignton (20.0 miles), Taunton (27.3 miles).
What to think about for automatic sliding doors in Exeter
- Power is needed near the head of the door, usually from a fused spur. If there is no supply nearby, allow for an electrician to run one before the fitting day so the door can be commissioned straight away.
- Where a building in Exeter is listed or sits in a conservation area, a new entrance may need consent first. Slim frames, a colour matched to the existing shopfront and careful drawings can all help an application.
- Entrances in Exeter that sit on an escape route need the fire strategy checked before the door is designed, because that decides whether break-out leaves, alarm-linked opening or battery opening are required.
- A sloping pavement or uneven threshold in front of a door in Exeter can stop floor guides working properly. The survey records floor levels, so any levelling is included in the quote rather than discovered on the day.
- Older shopfronts in Exeter often have a timber or steel frame that was never designed to carry a sliding door header. The survey checks what sits above the opening and whether new support is needed before anything is ordered.
Automatic sliding doors in Exeter: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £4,495 to £12,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide door set, about 1.0 to 1.2 m clear opening | £4,495 – £7,995 | framed aluminium and glass, installed, ex VAT |
| Bi-parting door set, about 2 m clear opening, with side screens | £6,995 – £12,995 | installed, ex VAT |
| Large, full-height or heavy-duty entrances | from £14,995 | Priced on survey |
| Break-out leaves and screens for an escape route | £995 – £3,995 | added to a sliding door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Exeter and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic sliding doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Ready to replace a heavy door in Exeter? Tell us the width, the type of building and how busy it gets, and we will take it from there.
Automatic sliding doors in Exeter: questions
Do we need consent for a new entrance in Exeter?
It depends on the building. A change to how a shopfront looks may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. We flag the question at survey and can provide drawings and product details to support an application if one is needed.
Is there a guide price for automatic sliding doors in Exeter?
Our guide is £4,495 to £12,995 excluding VAT (per door set), the same guide prices we use across the UK. The free site survey in Exeter confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Who checks that a new sliding door in Exeter is safe?
The installing engineer sets the speeds, forces and sensor zones, tests the door and completes a site-specific risk assessment before handing it over. You keep the test record and the risk assessment for your own files, and they form the baseline for every service visit and inspection after that.
Will a new sliding door in Exeter work with our alarm and access control?
In most cases, yes. The operator can take signals from a fire alarm panel, a card reader, a keypad, an intercom or a timer. Tell us what you have at the survey, and the quote will show the interface work and who is responsible for each connection, whether that is us, your electrician or your alarm company.
What power supply is needed for automatic sliding doors in Exeter?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Exeter is agreed before work starts.
Do businesses in Exeter have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.