UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic sliding doors · County Durham

Automatic sliding doors in Stanley

Replacing a worn manual door with a powered sliding entrance is one of the most common jobs we arrange in Stanley. The new door is made to your measured opening, fitted with sensors and a programme switch, and handed over with a test record and risk assessment for your files.

Town
Stanley
Area
County Durham
Postcodes
DH9
Guide price
Typically £4,495 to £12,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Stanley and nearby

We do not keep premises in Stanley. Instead, enquiries about automatic sliding doors come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the DH9 postcode district on a date that suits the site.

Care homes in and around Stanley often need automatic doors on corridors and day rooms as well as at the main entrance. Gentle operation, hold-open devices linked to the fire alarm and controlled exits help residents move about safely.

Nearby towns we also list for automatic sliding doors (straight-line distance): Chester-le-Street (5.0 miles), Consett (5.4 miles), Gateshead (7.6 miles), Washington (7.6 miles), Durham (8.0 miles), Newcastle upon Tyne (8.0 miles).

What to think about for automatic sliding doors in Stanley

  • Power is needed near the head of the door, usually from a fused spur. If there is no supply nearby, allow for an electrician to run one before the fitting day so the door can be commissioned straight away.
  • Surgeries and clinics need wide, easy access for wheelchairs, walking frames and the occasional stretcher. A clear opening of at least 1,000 mm is, in our view, a sensible starting point, and wider still where trolleys or beds pass through.
  • A sloping pavement or uneven threshold in front of a door in Stanley can stop floor guides working properly. The survey records floor levels, so any levelling is included in the quote rather than discovered on the day.
  • Shops that use a roller shutter at night need the new header to sit below the shutter box and clear of its guide channels. Both are measured at survey so the door and shutter can work together.
  • Schools, libraries and council buildings often prefer installation during holidays or at weekends. That is usually possible, as long as the dates are known when the order is placed and the door can be made in time.

Automatic sliding doors in Stanley: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £4,495 to £12,995 ex VAT.

ItemGuide priceNotes
Single-slide door set, about 1.0 to 1.2 m clear opening£4,495 – £7,995framed aluminium and glass, installed, ex VAT
Bi-parting door set, about 2 m clear opening, with side screens£6,995 – £12,995installed, ex VAT
Large, full-height or heavy-duty entrancesfrom £14,995Priced on survey
Break-out leaves and screens for an escape route£995 – £3,995added to a sliding door, ex VAT
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT
Battery backup for power-cut operation£395 – £695per door, ex VAT

Standards and rules in England

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Stanley.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Use the guide price tool for a quick figure, then book a free survey in Stanley to turn it into a fixed written price you can plan around.

Automatic sliding doors in Stanley: questions

What happens after the sliding door in Stanley is fitted?

You get a handover pack with the test record, risk assessment and user instructions, and staff are shown the programme switch. From then on the door needs daily checks and planned servicing. We can quote a service arrangement at intervals based on how much the door is used and the risk.

What will automatic sliding doors in Stanley cost?

Our guide is £4,495 to £12,995 excluding VAT (per door set), the same guide prices we use across the UK. The free site survey in Stanley confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Do we need consent for a new entrance in Stanley?

It depends on the building. A change to how a shopfront looks may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. We flag the question at survey and can provide drawings and product details to support an application if one is needed.

How long will the doorway in Stanley be out of action?

For a straightforward replacement, the opening is usually secure again by the end of the first day, with the door fully working by the end of the second. Larger shopfront changes take longer. How the doorway will be kept safe and secure overnight is agreed with you before work starts.

What power supply is needed for automatic sliding doors in Stanley?

Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.

How are payments structured for work in Stanley?

Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.

Who is responsible for automatic doors on escape routes in Stanley?

Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.

Next step

Automatic sliding doors in Stanley

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.