Covering Ellesmere Port and nearby
Coverage for automatic sliding doors runs across the CH65 and CH66 postcode districts and out into the surrounding parts of Cheshire. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.
Care homes and supported living schemes are spread across Ellesmere Port and the surrounding area, and their doors have to balance easy access with resident safety. Slow, gentle operation, hold-open devices linked to the fire alarm and controlled exits are typical requirements.
Nearby towns we also list for automatic sliding doors (straight-line distance): Chester (6.1 miles), Halewood (6.3 miles), Bebington (6.8 miles), Connah's Quay (7.8 miles), Runcorn (8.3 miles), Heswall (8.7 miles).
What to think about for automatic sliding doors in Ellesmere Port
- Shops that use a roller shutter at night need the new header to sit below the shutter box and clear of its guide channels. Both are measured at survey so the door and shutter can work together.
- High street entrances with heavy footfall tend to suit bi-parting leaves. They open faster than a single slide for the same clear width, which keeps queues moving at lunchtime and on Saturday afternoons.
- Care settings in Ellesmere Port sometimes need a sliding entrance that visitors can use freely while some residents cannot leave unaccompanied. Keypads and programme modes can be set to follow the home's own care policies.
- Surgeries and clinics need wide, easy access for wheelchairs, walking frames and the occasional stretcher. A clear opening of at least 1,000 mm is, in our view, a sensible starting point, and wider still where trolleys or beds pass through.
- Entrances in Ellesmere Port that sit on an escape route need the fire strategy checked before the door is designed, because that decides whether break-out leaves, alarm-linked opening or battery opening are required.
Automatic sliding doors in Ellesmere Port: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £4,495 to £12,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Single-slide door set, about 1.0 to 1.2 m clear opening | £4,495 – £7,995 | framed aluminium and glass, installed, ex VAT |
| Bi-parting door set, about 2 m clear opening, with side screens | £6,995 – £12,995 | installed, ex VAT |
| Large, full-height or heavy-duty entrances | from £14,995 | Priced on survey |
| Break-out leaves and screens for an escape route | £995 – £3,995 | added to a sliding door, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for automatic sliding doors in Ellesmere Port, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Ready to replace a heavy door in Ellesmere Port? Tell us the width, the type of building and how busy it gets, and we will take it from there.
Automatic sliding doors in Ellesmere Port: questions
Will a new sliding door in Ellesmere Port work with our alarm and access control?
In most cases, yes. The operator can take signals from a fire alarm panel, a card reader, a keypad, an intercom or a timer. Tell us what you have at the survey, and the quote will show the interface work and who is responsible for each connection, whether that is us, your electrician or your alarm company.
How much should I budget for automatic sliding doors in Ellesmere Port?
Our guide is £4,495 to £12,995 excluding VAT (per door set), the same guide prices we use across the UK. The free site survey in Ellesmere Port confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you install automatic sliding doors in Ellesmere Port?
Yes. We arrange supply and installation throughout Cheshire, with the work carried out by specialist automatic door engineers working under our management who travel to the site for the survey and the fitting. You deal with one contracting party from quote to handover, and the same arrangement can cover servicing afterwards if you want it.
Can the old door in Ellesmere Port be removed and taken away?
Yes. Removal of the existing door and frame is listed as a line in the quote, along with making good around the opening. Glass and aluminium are taken away for recycling where possible. If the old door belongs to a landlord, tell us at survey so its removal can be agreed with them before the work is booked.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Ellesmere Port is agreed before work starts.
Can automatic doors be fitted to a listed building in Ellesmere Port?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Which building regulations apply to a new automatic entrance in Ellesmere Port?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.