Covering Shirley and nearby
We cover the whole of the B90 postcode district, along with nearby towns in the West Midlands. You book each visit for automatic internal doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Care homes in and around Shirley often need automatic doors on corridors and day rooms as well as at the main entrance. Gentle operation, hold-open devices linked to the fire alarm and controlled exits help residents move about safely.
Nearby towns we also list for automatic internal doors (straight-line distance): Solihull (1.6 miles), Birmingham (5.9 miles), Smethwick (8.4 miles), Redditch (9.0 miles), Halesowen (10.0 miles), Oldbury (10.3 miles).
What to think about for automatic internal doors in Shirley
- Check the fire rating of each door before the survey. Fire doors need operators made for them, and fixings and cables must not weaken the rating.
- Infection control rules may set what materials and controls can be used. Wipe-clean surfaces and sealed switches that stand up to cleaning products are worth specifying.
- Doors linked to the fire alarm need a signal from the alarm panel. Allow time for your fire alarm contractor to provide the connection and test it with us.
- Measure what passes through the door, not just the door. Beds, hoists, trolleys and catering equipment can need a wider opening than the current door gives.
- Schools and colleges in Shirley often prefer corridor work in the holidays. Book the survey early in the term before, so doors and operators can be ordered and delivered in time.
Automatic internal doors in Shirley: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Swing operator on an existing internal door | £1,795 – £3,995 | low-energy or full-energy, installed, ex VAT |
| Operators on a pair of cross-corridor doors | £3,795 – £6,495 | installed, ex VAT |
| Internal single-slide automatic door set | £4,495 – £7,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Shirley and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic internal doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Planning a refurbishment in Shirley? Get in touch early and we will quote the internal doors with the rest of the works.
Automatic internal doors in Shirley: questions
Can you service the internal doors in Shirley after fitting?
Yes. We can arrange planned servicing with each door's operator, sensors and fire alarm release checked and a written record left. Servicing is chargeable, and the price per visit is agreed in writing before an engineer attends. Visits can be grouped so several doors are done together.
What will automatic internal doors in Shirley cost?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Shirley confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you work in hospitals in Shirley?
Yes. We work to the estates team's requirements for door widths, controls, infection control and fire alarm interfaces, and provide method statements, insurance details and the documents they ask for. Work on wards is usually planned out of hours or in phases.
How disruptive is the work in an occupied building in Shirley?
Usually less than people expect. Most swing operators take half a day to a day per door, and sliding doors a little longer. We plan the order of work to keep routes open, control dust, and agree any out-of-hours working in the quote.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Shirley is agreed before work starts.
What happens once the installation in Shirley is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Which building regulations apply to a new automatic entrance in Shirley?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.