Covering Tamworth and nearby
Coverage for automatic internal doors runs across the B77 and B79 postcode districts and out into the surrounding parts of Staffordshire. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.
Around Tamworth there is usually a mix of retail parks, business parks and town-centre shops, each with different door needs. A retail park unit may need a wide bi-parting door for trolleys, while a town-centre shop often has a narrow frontage better suited to a single slider or a folding door.
Nearby towns we also list for automatic internal doors (straight-line distance): Lichfield (6.3 miles), Sutton Coldfield (6.9 miles), Aldridge (9.5 miles), Burntwood (10.2 miles), Swadlincote (11.3 miles), Burton upon Trent (12.2 miles).
What to think about for automatic internal doors in Tamworth
- Offices in Tamworth with open-plan floors often have corridor fire doors that are held open by wedges. A proper hold-open device or operator removes the wedge and keeps the door working as a fire door.
- Plan the work around the building's routine. Clinical areas, classrooms and kitchens in Tamworth may need out-of-hours working, which should be agreed and priced up front.
- Infection control rules may set what materials and controls can be used. Wipe-clean surfaces and sealed switches that stand up to cleaning products are worth specifying.
- Measure what passes through the door, not just the door. Beds, hoists, trolleys and catering equipment can need a wider opening than the current door gives.
- Hospitals in Tamworth usually have estates teams with their own standards for door widths, controls and fire alarm interfaces. Share those early so the quote matches them.
Automatic internal doors in Tamworth: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Swing operator on an existing internal door | £1,795 – £3,995 | low-energy or full-energy, installed, ex VAT |
| Operators on a pair of cross-corridor doors | £3,795 – £6,495 | installed, ex VAT |
| Internal single-slide automatic door set | £4,495 – £7,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic internal doors and book a survey in Tamworth.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Make corridor and ward doors in Tamworth easier to get through. Start with a free survey, with no obligation to go ahead.
Automatic internal doors in Tamworth: questions
Can internal doors at our offices in Tamworth be linked to access control?
Yes. Card readers, fob readers or keypads can control who passes into staff areas, and the door opens automatically once access is granted. Locks release on the fire alarm where the fire strategy requires, and we can connect to an existing access control system or supply a standalone one.
What is the guide price for automatic internal doors in Tamworth?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Tamworth confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you service the internal doors in Tamworth after fitting?
Yes. We can arrange planned servicing with each door's operator, sensors and fire alarm release checked and a written record left. Servicing is chargeable, and the price per visit is agreed in writing before an engineer attends. Visits can be grouped so several doors are done together.
Can our cross-corridor fire doors in Tamworth be held open?
Yes, using hold-open devices or fire-rated operators linked to the fire alarm, so the doors close when the alarm operates. We check the doors' condition and ratings first. Any change to how fire doors behave should be agreed with whoever holds your fire risk assessment.
What does the free site survey in Tamworth involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automatic internal doors, with drawings where the door type needs them.
What power supply is needed for automatic internal doors in Tamworth?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Who is responsible for automatic doors on escape routes in Tamworth?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.