Covering Thornaby-on-Tees and nearby
We cover the whole of the TS17 postcode district, along with nearby towns in North Yorkshire. You book each visit for automatic internal doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Doors at quieter sites in Thornaby-on-Tees and elsewhere in North Yorkshire can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for automatic internal doors (straight-line distance): Stockton-on-Tees (2.5 miles), Yarm (3.1 miles), Billingham (3.9 miles), Middlesbrough (4.0 miles), Darlington (10.1 miles), Hartlepool (11.1 miles).
What to think about for automatic internal doors in Thornaby-on-Tees
- Offices in Thornaby-on-Tees with open-plan floors often have corridor fire doors that are held open by wedges. A proper hold-open device or operator removes the wedge and keeps the door working as a fire door.
- Hospitals in Thornaby-on-Tees usually have estates teams with their own standards for door widths, controls and fire alarm interfaces. Share those early so the quote matches them.
- Measure what passes through the door, not just the door. Beds, hoists, trolleys and catering equipment can need a wider opening than the current door gives.
- Doors linked to the fire alarm need a signal from the alarm panel. Allow time for your fire alarm contractor to provide the connection and test it with us.
- Check the fire rating of each door before the survey. Fire doors need operators made for them, and fixings and cables must not weaken the rating.
Automatic internal doors in Thornaby-on-Tees: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Swing operator on an existing internal door | £1,795 – £3,995 | low-energy or full-energy, installed, ex VAT |
| Operators on a pair of cross-corridor doors | £3,795 – £6,495 | installed, ex VAT |
| Internal single-slide automatic door set | £4,495 – £7,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Thornaby-on-Tees and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic internal doors separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a free survey of the internal doors at your building in Thornaby-on-Tees, and we will send a fixed, itemised quote door by door.
Automatic internal doors in Thornaby-on-Tees: questions
Do you work in hospitals in Thornaby-on-Tees?
Yes. We work to the estates team's requirements for door widths, controls, infection control and fire alarm interfaces, and provide method statements, insurance details and the documents they ask for. Work on wards is usually planned out of hours or in phases.
What do you charge for automatic internal doors in Thornaby-on-Tees?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Thornaby-on-Tees confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you supply internal sliding doors as well as swing operators in Thornaby-on-Tees?
Yes. Where there is wall space beside the opening, a sliding door keeps the corridor clear and gives a wide opening, which suits wards. Where there is not, or the door is a fire door, a swing operator is usually the better fit. The survey compares both.
How disruptive is the work in an occupied building in Thornaby-on-Tees?
Usually less than people expect. Most swing operators take half a day to a day per door, and sliding doors a little longer. We plan the order of work to keep routes open, control dust, and agree any out-of-hours working in the quote.
How do you make sure the door works for disabled visitors in Thornaby-on-Tees?
We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.
Can automatic doors be fitted to a listed building in Thornaby-on-Tees?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Who is responsible for automatic doors on escape routes in Thornaby-on-Tees?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.