Covering Rochester and nearby
Our coverage of Rochester takes in the ME1 postcode district and the neighbouring parts of Kent. If your address sits close to a boundary, it is still covered: send the postcode with your enquiry about automatic internal doors and we will confirm the arrangements and the price in writing.
Parking on a busy high street can be tight. When work is booked in Rochester, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.
Nearby towns we also list for automatic internal doors (straight-line distance): Chatham (1.1 miles), Strood (1.3 miles), Gillingham (1.9 miles), Gravesend (6.9 miles), Maidstone (8.4 miles), Northfleet (8.7 miles).
What to think about for automatic internal doors in Rochester
- Lightweight stud partitions may not carry an operator without extra support. The survey checks what the wall is made of and what reinforcement is needed.
- Check the fire rating of each door before the survey. Fire doors need operators made for them, and fixings and cables must not weaken the rating.
- Infection control rules may set what materials and controls can be used. Wipe-clean surfaces and sealed switches that stand up to cleaning products are worth specifying.
- Hospitals in Rochester usually have estates teams with their own standards for door widths, controls and fire alarm interfaces. Share those early so the quote matches them.
- Doors linked to the fire alarm need a signal from the alarm panel. Allow time for your fire alarm contractor to provide the connection and test it with us.
Automatic internal doors in Rochester: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Swing operator on an existing internal door | £1,795 – £3,995 | low-energy or full-energy, installed, ex VAT |
| Operators on a pair of cross-corridor doors | £3,795 – £6,495 | installed, ex VAT |
| Internal single-slide automatic door set | £4,495 – £7,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for automatic internal doors in Rochester, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Book a free survey of the internal doors at your building in Rochester, and we will send a fixed, itemised quote door by door.
Automatic internal doors in Rochester: questions
Do you supply internal sliding doors as well as swing operators in Rochester?
Yes. Where there is wall space beside the opening, a sliding door keeps the corridor clear and gives a wide opening, which suits wards. Where there is not, or the door is a fire door, a swing operator is usually the better fit. The survey compares both.
Is there a guide price for automatic internal doors in Rochester?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Rochester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you automate the corridor doors in our care home in Rochester?
Yes. We survey each door, including its fire rating, hinges, frame and power, and quote a fixed price. Doors can be set to open gently and slowly, with extra safety sensors where residents are frail. Work is planned around your care routines and agreed with the home manager.
Can our cross-corridor fire doors in Rochester be held open?
Yes, using hold-open devices or fire-rated operators linked to the fire alarm, so the doors close when the alarm operates. We check the doors' condition and ratings first. Any change to how fire doors behave should be agreed with whoever holds your fire risk assessment.
What does the written quote for automatic internal doors in Rochester include?
The quote lists each item separately: the door or equipment, installation, electrical connections where we provide them, removal of anything being replaced, testing and handover. It is a fixed price for the work described, so it does not change unless the scope changes, and any change is agreed with you in writing first.
Is there a warranty on automatic internal doors?
Yes. The warranty terms for the equipment and the installation are set out in your written quote, so you can see exactly what is covered before you accept. Keeping the door serviced at the recommended intervals helps keep it in good order, and the quote explains any conditions that apply to the warranty.
Which building regulations apply to a new automatic entrance in Rochester?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.