Covering Caernarfon and nearby
We cover the whole of the LL55 postcode district, along with nearby towns in Gwynedd. You book each visit for automatic internal doors directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Many buildings in Caernarfon are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for automatic internal doors (straight-line distance): Bangor (8.3 miles), Holyhead (18.8 miles), Llandudno (22.1 miles), Colwyn Bay (24.9 miles).
What to think about for automatic internal doors in Caernarfon
- Each automated door needs power at the head. In older buildings in Caernarfon, running new supplies through finished corridors can be a significant part of the cost.
- Schools and colleges in Caernarfon often prefer corridor work in the holidays. Book the survey early in the term before, so doors and operators can be ordered and delivered in time.
- Infection control rules may set what materials and controls can be used. Wipe-clean surfaces and sealed switches that stand up to cleaning products are worth specifying.
- Offices in Caernarfon with open-plan floors often have corridor fire doors that are held open by wedges. A proper hold-open device or operator removes the wedge and keeps the door working as a fire door.
- Lightweight stud partitions may not carry an operator without extra support. The survey checks what the wall is made of and what reinforcement is needed.
Automatic internal doors in Caernarfon: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Swing operator on an existing internal door | £1,795 – £3,995 | low-energy or full-energy, installed, ex VAT |
| Operators on a pair of cross-corridor doors | £3,795 – £6,495 | installed, ex VAT |
| Internal single-slide automatic door set | £4,495 – £7,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in Wales
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic internal doors and book a survey in Caernarfon.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Book a free survey of the internal doors at your building in Caernarfon, and we will send a fixed, itemised quote door by door.
Automatic internal doors in Caernarfon: questions
Can you service the internal doors in Caernarfon after fitting?
Yes. We can arrange planned servicing with each door's operator, sensors and fire alarm release checked and a written record left. Servicing is chargeable, and the price per visit is agreed in writing before an engineer attends. Visits can be grouped so several doors are done together.
Can you give me a price for automatic internal doors in Caernarfon?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Caernarfon confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can internal doors at our offices in Caernarfon be linked to access control?
Yes. Card readers, fob readers or keypads can control who passes into staff areas, and the door opens automatically once access is granted. Locks release on the fire alarm where the fire strategy requires, and we can connect to an existing access control system or supply a standalone one.
Can you fit automatic doors in a school in Caernarfon?
Yes. Corridor fire doors, dining halls and doors to accessible facilities are common. We usually plan the work for school holidays or after hours, and agree the programme with the school in writing so safeguarding and fire arrangements are maintained throughout.
Can automatic doors be fitted to a listed building in Caernarfon?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
What should I send before the survey in Caernarfon?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for automatic internal doors together more easily.
Who is responsible for automatic doors on escape routes in Caernarfon?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005. Automatic doors on an escape route need fail-safe opening or break-out, and sliding or revolving doors must not be used for exits specifically intended as emergency exits.