UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic internal doors · Greater Manchester

Automatic internal doors in Denton

Touch-free internal doors help with infection control in clinics and care settings around Denton. We pair the door with sensors or wave switches so nobody needs to touch a handle or push plate, and choose finishes that are easy to wipe down.

Town
Denton
Area
Greater Manchester
Postcodes
M34
Guide price
From £1,795 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Denton and nearby

Requests for automatic internal doors in Denton are handled by us and passed to a specialist engineer working under our management. Coverage includes the M34 postcode district: town-centre premises, business and retail sites, public buildings and residential streets alike.

GP surgeries, dental practices and pharmacies in Denton often serve older patients and people with limited mobility. A low-energy swing operator, or a gentle sliding door with a push pad, can make a real difference at entrances like these.

Nearby towns we also list for automatic internal doors (straight-line distance): Hyde (1.6 miles), Dukinfield (1.8 miles), Droylsden (2.0 miles), Ashton-under-Lyne (2.3 miles), Bredbury (2.8 miles), Stalybridge (3.1 miles).

What to think about for automatic internal doors in Denton

  • Plan the work around the building's routine. Clinical areas, classrooms and kitchens in Denton may need out-of-hours working, which should be agreed and priced up front.
  • Care homes in Denton often have residents with dementia. Think about which doors should open freely and which should be controlled, and agree that as a care decision before choosing controls.
  • Check the fire rating of each door before the survey. Fire doors need operators made for them, and fixings and cables must not weaken the rating.
  • Lightweight stud partitions may not carry an operator without extra support. The survey checks what the wall is made of and what reinforcement is needed.
  • Measure what passes through the door, not just the door. Beds, hoists, trolleys and catering equipment can need a wider opening than the current door gives.

Automatic internal doors in Denton: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT.

ItemGuide priceNotes
Swing operator on an existing internal door£1,795 – £3,995low-energy or full-energy, installed, ex VAT
Operators on a pair of cross-corridor doors£3,795 – £6,495installed, ex VAT
Internal single-slide automatic door set£4,495 – £7,995installed, ex VAT
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT

Standards and rules in England

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic internal doors and book a survey in Denton.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

Send us a list of the doors and how they are used, and we will plan automatic internal doors for your building in Denton.

Automatic internal doors in Denton: questions

How disruptive is the work in an occupied building in Denton?

Usually less than people expect. Most swing operators take half a day to a day per door, and sliding doors a little longer. We plan the order of work to keep routes open, control dust, and agree any out-of-hours working in the quote.

What will automatic internal doors in Denton cost?

Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Denton confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you fit automatic doors in a school in Denton?

Yes. Corridor fire doors, dining halls and doors to accessible facilities are common. We usually plan the work for school holidays or after hours, and agree the programme with the school in writing so safeguarding and fire arrangements are maintained throughout.

Do you work in hospitals in Denton?

Yes. We work to the estates team's requirements for door widths, controls, infection control and fire alarm interfaces, and provide method statements, insurance details and the documents they ask for. Work on wards is usually planned out of hours or in phases.

What happens once the installation in Denton is finished?

The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.

What should I send before the survey in Denton?

A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for automatic internal doors together more easily.

Do businesses in Denton have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Automatic internal doors in Denton

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.