Coverage across the Glasgow area
Here is how coverage works in the Glasgow area. You contact us with the address and what the door needs, we confirm the price in writing, and a specialist engineer working under our management attends on an agreed date. That applies to automatic internal doors at a single shop door or across a whole estate of buildings, in any of the towns below or between them.
Towns listed in the Glasgow area: Glasgow, Newton Mearns, Barrhead, Giffnock, Clarkston.
What to think about for automatic internal doors in the Glasgow area
- Infection control rules may set what materials and controls can be used. Wipe-clean surfaces and sealed switches that stand up to cleaning products are worth specifying.
- Noise matters on wards and in bedrooms. Ask for night settings or quieter operators on doors near where people sleep, and check how loud any electric locks are when they release.
- Check the fire rating of each door before the survey. Fire doors need operators made for them, and fixings and cables must not weaken the rating.
- Lightweight stud partitions may not carry an operator without extra support. The survey checks what the wall is made of and what reinforcement is needed.
- Plan the work around the building's routine. Clinical areas, classrooms and kitchens in the Glasgow area may need out-of-hours working, which should be agreed and priced up front.
Automatic internal doors in the Glasgow area: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £1,795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Swing operator on an existing internal door | £1,795 – £3,995 | low-energy or full-energy, installed, ex VAT |
| Operators on a pair of cross-corridor doors | £3,795 – £6,495 | installed, ex VAT |
| Internal single-slide automatic door set | £4,495 – £7,995 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in Scotland
Under the Equality Act 2010, service providers and employers in Scotland must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Scottish building standards guidance (the non-domestic Technical Handbook) expects an accessible entrance door to give a clear opening of at least 800 mm, says powered doors improve accessibility as long as they add no new hazard, and expects signage, sensors that hold the door open long enough, and guarding against collision or entrapment.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in the Glasgow area.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Make corridor and ward doors in the Glasgow area easier to get through. Start with a free survey, with no obligation to go ahead.
Automatic internal doors in the Glasgow area: questions
Can internal doors at our offices in the Glasgow area be linked to access control?
Yes. Card readers, fob readers or keypads can control who passes into staff areas, and the door opens automatically once access is granted. Locks release on the fire alarm where the fire strategy requires, and we can connect to an existing access control system or supply a standalone one.
Is there a guide price for automatic internal doors in the Glasgow area?
Our guide starts from £1,795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in the Glasgow area confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can our cross-corridor fire doors in the Glasgow area be held open?
Yes, using hold-open devices or fire-rated operators linked to the fire alarm, so the doors close when the alarm operates. We check the doors' condition and ratings first. Any change to how fire doors behave should be agreed with whoever holds your fire risk assessment.
Can you service the internal doors in the Glasgow area after fitting?
Yes. We can arrange planned servicing with each door's operator, sensors and fire alarm release checked and a written record left. Servicing is chargeable, and the price per visit is agreed in writing before an engineer attends. Visits can be grouped so several doors are done together.
What happens to the old door when a new one is fitted in the Glasgow area?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
What should I send before the survey in the Glasgow area?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for automatic internal doors together more easily.
Is a building warrant needed for a new automatic entrance in the Glasgow area?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.