Covering Reigate and nearby
Engineers working under our management travel to addresses across the RH2 postcode district for automatic folding doors. There is no depot or showroom in Reigate; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Parking on a busy high street can be tight. When work is booked in Reigate, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.
Nearby towns we also list for automatic folding doors (straight-line distance): Redhill (1.5 miles), Horley (4.8 miles), Dorking (5.5 miles), Caterham (6.3 miles), Leatherhead (6.9 miles), Epsom (7.0 miles).
What to think about for automatic folding doors in Reigate
- Pavements in older parts of Reigate often slope or dip at the threshold. Bottom pivots need a level, solid floor, so the survey records levels and any work needed.
- Small units in Reigate often have their only power supply at the back of the shop. The operator needs a fused spur at the head of the door, so allow for a cable run.
- Fold direction matters. Folding inwards keeps the pavement clear but takes a little space inside the shop; folding outwards suits internal doors where room inside is tight.
- Exposed corner plots catch the wind from more than one direction. A canopy, good seals and the right fold direction help a folding door run reliably in bad weather.
- Folding doors have more hinges than sliding doors. Planned servicing at intervals based on how busy the door is keeps hinges, pivots and finger guards in good order.
Automatic folding doors in Reigate: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Automatic folding door, up to about 2 m clear opening | £5,995 – £10,995 | installed, ex VAT |
| Folding door with break-out for an escape route | top of range or on survey | depends on the fire strategy |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic folding doors and book a survey in Reigate.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Book a free survey in Reigate to see the clear width, fold direction and fixed price for automatic folding doors at your premises.
Automatic folding doors in Reigate: questions
Can you replace an old folding door in Reigate?
Yes. Where the existing folding door is worn or its parts are no longer available, we can replace it with a new automatic folding door, or fit a new operator to sound leaves if that is better value. The survey looks at both options and the quote explains the difference.
What will automatic folding doors in Reigate cost?
Our guide starts from £5,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Reigate confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do we need permission to change the shop door in Reigate?
It depends on the building. Changing how a shopfront looks may need planning permission, and listed buildings may need listed building consent. Your local planning authority decides. If you rent the unit, the landlord will usually need to approve the work too. We flag both at the survey.
Can a folding door in Reigate open with a push button instead of a sensor?
Yes. Many shops use a radar sensor so the door opens as customers approach, but push pads, wave-to-open switches or a key switch can be used instead or as well. Internal doors often use push buttons, so the door only opens when someone needs it.
What happens to the old door when a new one is fitted in Reigate?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
What is the lead time for automatic folding doors in Reigate?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Which building regulations apply to a new automatic entrance in Reigate?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.