Covering Richmond and nearby
Engineers working under our management travel to addresses across the TW9 and TW10 postcode districts for automatic folding doors. There is no depot or showroom in Richmond; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Hospitals, surgeries and care homes across London deal with heavy footfall and vulnerable users at the same time. In Richmond, doors in healthcare settings are usually set up for gentle, reliable operation, with hold-open devices on fire doors linked to the alarm.
Nearby towns we also list for automatic folding doors (straight-line distance): Twickenham (1.8 miles), Hounslow (2.4 miles), Chiswick (3.0 miles), Kingston upon Thames (3.4 miles), Ealing (3.5 miles), Acton (3.5 miles).
What to think about for automatic folding doors in Richmond
- Busy food and drink outlets in Richmond may want the door to stay folded open in summer and run automatically in winter. Hold-open and automatic modes on the programme switch make that easy.
- Pavements in older parts of Richmond often slope or dip at the threshold. Bottom pivots need a level, solid floor, so the survey records levels and any work needed.
- Check what sits beside the doorway. Displays, A-boards, bins and queues in the area where the leaves fold can stop the door or set off its sensors, so plan a clear zone.
- Listed shopfronts and conservation areas in Richmond may need consent for a new entrance. Folding doors with slim frames in a matched colour often keep the character of the frontage.
- Exposed corner plots catch the wind from more than one direction. A canopy, good seals and the right fold direction help a folding door run reliably in bad weather.
Automatic folding doors in Richmond: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £5,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Automatic folding door, up to about 2 m clear opening | £5,995 – £10,995 | installed, ex VAT |
| Folding door with break-out for an escape route | top of range or on survey | depends on the fire strategy |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for automatic folding doors in Richmond, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
For a wide, hands-free entrance on a narrow shopfront in Richmond, talk to us. The survey is free and there is no obligation to go ahead.
Automatic folding doors in Richmond: questions
What happens after the folding door in Richmond is installed?
You receive the test record, a site-specific risk assessment and user instructions, and staff are shown the programme switch and how to fold the door by hand. Planned servicing can then be arranged, with each visit priced in writing before an engineer attends.
How are prices worked out for automatic folding doors in Richmond?
Our guide starts from £5,995 excluding VAT (per door set), the same guide price we use across the UK. The free site survey in Richmond confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you fit automatic folding doors in Richmond?
Yes. We arrange supply and installation of automatic folding doors in Richmond and across Greater London. Specialist automatic door engineers working under our management survey and fit the door, and we remain the contracting party, so you have one point of contact from quote to handover.
Is the folding door survey in Richmond free?
Yes, for a new automatic folding door the survey is free and there is no obligation. The engineer measures the opening and sweep zone, checks the floor, structure and power, and you receive a drawing and a fixed, itemised written quote.
What happens once the installation in Richmond is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
What happens to the old door when a new one is fitted in Richmond?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Who is responsible for automatic doors on escape routes in Richmond?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.