Covering Swansea and nearby
Homes, businesses and public buildings throughout the SA1, SA2, SA5 and SA7 postcode districts can arrange automatic entrance lobbies with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Swansea for the job rather than working from premises in town.
Access in a city centre needs planning. Loading bays, permit parking, pedestrianised streets and delivery windows all affect when an engineer can unload, so a visit to Swansea is booked around them and any restrictions are noted in advance.
Nearby towns we also list for automatic entrance lobbies (straight-line distance): Gorseinon (5.4 miles), Neath (6.6 miles), Port Talbot (7.3 miles), Llanelli (10.3 miles), Ammanford (12.0 miles), Maesteg (12.3 miles).
What to think about for automatic entrance lobbies in Swansea
- Where an over-door heater is fitted, check its settings once the lobby is working. Many buildings find the heater can run at a lower setting afterwards.
- Measure the depth you can give the lobby before settling on a layout. A lobby that is too shallow lets both sets open together and loses most of its benefit.
- Surgeries and clinics in Swansea need lobbies wide and deep enough for wheelchairs, mobility scooters and people with walking frames. Avoid interlocks at public entrances unless there is a strong security reason for them.
- Work on a lobby in Swansea takes longer than a door swap. Ask for the programme in writing, including which entrance stays usable each day and any out-of-hours working.
- Listed buildings and conservation areas in Swansea may limit changes to the frontage. An internal lobby behind the existing doors often keeps the street view unchanged, though consent may still be needed.
Automatic entrance lobbies in Swansea: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £14,995 to £34,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Draught lobby: two sets of automatic sliding doors and glazed screens | £14,995 – £34,995 | doors and screens, installed, ex VAT |
| Lobby with curtain walling or building work | Priced on survey | larger public-sector lobbies have cost £50,000 or more |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Lobby prices cover the doors and glazed screens. Building work, flooring, heating and curtain walling are priced on survey.
Standards and rules in Wales
Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Under the Equality Act 2010, service providers and employers in Wales must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Swansea and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on automatic entrance lobbies separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Ask for a fixed price on an automatic lobby in Swansea. The quote covers doors, screens, sequencing, testing and handover, with the lead time set out.
Automatic entrance lobbies in Swansea: questions
Can you add a lobby to our existing entrance in Swansea?
Usually, if there is enough depth inside the existing doors or room for a glazed porch outside. We check the space, the floor and the power at the free survey, then quote either an inner set to pair with your current doors or a complete new lobby.
How are prices worked out for automatic entrance lobbies in Swansea?
Our guide is £14,995 to £34,995 excluding VAT (per lobby, doors and screens), the same guide prices we use across the UK. The free site survey in Swansea confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you design lobbies for new buildings in Swansea?
Yes. We can work from the architect's drawings, suggest door types and depth, and quote the doors, screens and controls as one package for the main contractor or the client. Designing the lobby in at the start is usually simpler and cheaper than adding it later.
Can the lobby doors in Swansea be locked at night?
Yes. The outer set is usually locked out of hours, and the inner set can be locked too. Locks and any access control are wired to release on the fire alarm where the fire strategy requires, and the settings are recorded at handover.
What is the lead time for automatic entrance lobbies in Swansea?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Can automatic doors be fitted to a listed building in Swansea?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Who is responsible for automatic doors on escape routes in Swansea?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005. Automatic doors on an escape route need fail-safe opening or break-out, and sliding or revolving doors must not be used for exits specifically intended as emergency exits.