Covering Beeston and nearby
For automatic entrance lobbies, coverage around Beeston is set by postcode and includes the NG9 postcode district, as well as nearby addresses in Nottinghamshire. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.
Many buildings in Beeston are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for automatic entrance lobbies (straight-line distance): Long Eaton (2.6 miles), Nottingham (3.8 miles), West Bridgford (3.9 miles), Ilkeston (5.4 miles), Carlton (6.5 miles), Eastwood (6.7 miles).
What to think about for automatic entrance lobbies in Beeston
- Where an over-door heater is fitted, check its settings once the lobby is working. Many buildings find the heater can run at a lower setting afterwards.
- Entrances in Beeston that face the prevailing wind lose the most heat and take the most rain. A deeper lobby, or a right-angle layout that turns the inner doors away from the wind, makes the biggest difference there.
- Plan for a recessed matting well across the lobby floor. Wet shoes on a hard floor are a slip risk, and loose mats can trip people or upset floor-level sensors.
- Consider deliveries and bulky items. If trolleys or stock come through the front entrance, a switch that holds both sets open for short periods saves staff waiting on the sequencing.
- If the lobby is on an escape route, the fire strategy decides what both door sets do on alarm. Sequencing and interlocks must release so nothing stops people leaving.
Automatic entrance lobbies in Beeston: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £14,995 to £34,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Draught lobby: two sets of automatic sliding doors and glazed screens | £14,995 – £34,995 | doors and screens, installed, ex VAT |
| Lobby with curtain walling or building work | Priced on survey | larger public-sector lobbies have cost £50,000 or more |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Lobby prices cover the doors and glazed screens. Building work, flooring, heating and curtain walling are priced on survey.
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for automatic entrance lobbies in Beeston, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Ask for a fixed price on an automatic lobby in Beeston. The quote covers doors, screens, sequencing, testing and handover, with the lead time set out.
Automatic entrance lobbies in Beeston: questions
Will an automatic lobby in Beeston need planning permission?
An internal lobby often leaves the outside of the building unchanged, but a glazed porch or new frontage may need planning permission, and a listed building may need consent for either. We point out likely approvals at survey so they can be sorted before anything is ordered.
Can you give me a price for automatic entrance lobbies in Beeston?
Our guide is £14,995 to £34,995 excluding VAT (per lobby, doors and screens), the same guide prices we use across the UK. The free site survey in Beeston confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will our entrance in Beeston have to close while the lobby is built?
Not for the whole job in most cases. We plan the order of work so one set of doors, or a temporary door, keeps the entrance usable, and agree any out-of-hours working in the quote. A short closure may be needed when the final set is commissioned.
Can the lobby doors in Beeston be locked at night?
Yes. The outer set is usually locked out of hours, and the inner set can be locked too. Locks and any access control are wired to release on the fire alarm where the fire strategy requires, and the settings are recorded at handover.
What does the free site survey in Beeston involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automatic entrance lobbies, with drawings where the door type needs them.
What happens once the installation in Beeston is finished?
The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.
Who is responsible for automatic doors on escape routes in Beeston?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.