Covering Stamford and nearby
Homes, businesses and public buildings throughout the PE9 postcode district can arrange automatic entrance lobbies with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Stamford for the job rather than working from premises in town.
Many buildings in Stamford are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.
Nearby towns we also list for automatic entrance lobbies (straight-line distance): Ketton (3.4 miles), Oakham (10.5 miles), Uppingham (10.9 miles), Peterborough (11.2 miles), Corby (13.7 miles), Spalding (16.8 miles).
What to think about for automatic entrance lobbies in Stamford
- Surgeries and clinics in Stamford need lobbies wide and deep enough for wheelchairs, mobility scooters and people with walking frames. Avoid interlocks at public entrances unless there is a strong security reason for them.
- Listed buildings and conservation areas in Stamford may limit changes to the frontage. An internal lobby behind the existing doors often keeps the street view unchanged, though consent may still be needed.
- Consider deliveries and bulky items. If trolleys or stock come through the front entrance, a switch that holds both sets open for short periods saves staff waiting on the sequencing.
- Where an over-door heater is fitted, check its settings once the lobby is working. Many buildings find the heater can run at a lower setting afterwards.
- Plan for a recessed matting well across the lobby floor. Wet shoes on a hard floor are a slip risk, and loose mats can trip people or upset floor-level sensors.
Automatic entrance lobbies in Stamford: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £14,995 to £34,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Draught lobby: two sets of automatic sliding doors and glazed screens | £14,995 – £34,995 | doors and screens, installed, ex VAT |
| Lobby with curtain walling or building work | Priced on survey | larger public-sector lobbies have cost £50,000 or more |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Lobby prices cover the doors and glazed screens. Building work, flooring, heating and curtain walling are priced on survey.
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic entrance lobbies and book a survey in Stamford.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Tell us how busy the entrance is and how much space you have in Stamford, and we will plan a lobby around it, beginning with a free site visit.
Automatic entrance lobbies in Stamford: questions
How will a lobby cope with the weather in Stamford?
The survey looks at which way the entrance faces and how exposed it is. In windy or wet spots, a deeper lobby, a right-angle layout or doors with stronger seals and wind settings help. A good matting well deals with the water that still comes in on shoes.
How much should I budget for automatic entrance lobbies in Stamford?
Our guide is £14,995 to £34,995 excluding VAT (per lobby, doors and screens), the same guide prices we use across the UK. The free site survey in Stamford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can the lobby doors in Stamford be locked at night?
Yes. The outer set is usually locked out of hours, and the inner set can be locked too. Locks and any access control are wired to release on the fire alarm where the fire strategy requires, and the settings are recorded at handover.
Is a revolving door a better option than a lobby in Stamford?
It can be where space is tight and traffic is steady, because a revolving door seals the entrance at every turn. A revolving door is not accessible on its own, though, so an accessible powered sliding or swing door is needed alongside it. We can price both at survey.
Do I need permission from a landlord or the council before work in Stamford?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
What power supply is needed for automatic entrance lobbies in Stamford?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Which building regulations apply to a new automatic entrance in Stamford?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.