Covering Rochester and nearby
For automatic entrance lobbies, coverage around Rochester is set by postcode and includes the ME1 postcode district, as well as nearby addresses in Kent. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.
Doors at quieter sites in Rochester and elsewhere in Kent can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.
Nearby towns we also list for automatic entrance lobbies (straight-line distance): Chatham (1.1 miles), Strood (1.3 miles), Gillingham (1.9 miles), Gravesend (6.9 miles), Maidstone (8.4 miles), Northfleet (8.7 miles).
What to think about for automatic entrance lobbies in Rochester
- Plan for a recessed matting well across the lobby floor. Wet shoes on a hard floor are a slip risk, and loose mats can trip people or upset floor-level sensors.
- Work on a lobby in Rochester takes longer than a door swap. Ask for the programme in writing, including which entrance stays usable each day and any out-of-hours working.
- Two operators mean two power supplies, or one supply sized for both. Check whether there is a suitable supply at ceiling height, as cable runs across a finished foyer add cost.
- Office buildings on business parks in Rochester often have a reception desk close to the entrance. Keeping the desk out of line with the doors, and making the lobby deep enough, keeps the receptionist out of the draught.
- If the lobby is on an escape route, the fire strategy decides what both door sets do on alarm. Sequencing and interlocks must release so nothing stops people leaving.
Automatic entrance lobbies in Rochester: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £14,995 to £34,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Draught lobby: two sets of automatic sliding doors and glazed screens | £14,995 – £34,995 | doors and screens, installed, ex VAT |
| Lobby with curtain walling or building work | Priced on survey | larger public-sector lobbies have cost £50,000 or more |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Battery backup for power-cut operation | £395 – £695 | per door, ex VAT |
Lobby prices cover the doors and glazed screens. Building work, flooring, heating and curtain walling are priced on survey.
Standards and rules in England
In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. New entrances and some alterations count as building work, so check with building control before the work is ordered.
How it works
- Describe what you need. Whether the job is automatic entrance lobbies for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Rochester.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Tell us how busy the entrance is and how much space you have in Rochester, and we will plan a lobby around it, beginning with a free site visit.
Automatic entrance lobbies in Rochester: questions
Will our entrance in Rochester have to close while the lobby is built?
Not for the whole job in most cases. We plan the order of work so one set of doors, or a temporary door, keeps the entrance usable, and agree any out-of-hours working in the quote. A short closure may be needed when the final set is commissioned.
How are prices worked out for automatic entrance lobbies in Rochester?
Our guide is £14,995 to £34,995 excluding VAT (per lobby, doors and screens), the same guide prices we use across the UK. The free site survey in Rochester confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you look after the lobby doors in Rochester after installation?
We can arrange planned servicing for both door sets, checking sequencing, safety sensors and alarm releases at each visit and leaving a written record. Servicing is charged per visit, and the price is confirmed in writing before an engineer comes out.
Can the lobby doors in Rochester be locked at night?
Yes. The outer set is usually locked out of hours, and the inner set can be locked too. Locks and any access control are wired to release on the fire alarm where the fire strategy requires, and the settings are recorded at handover.
Can automatic doors be fitted to a listed building in Rochester?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
What happens to the old door when a new one is fitted in Rochester?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Do businesses in Rochester have to fit automatic doors?
No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.