UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic entrance lobbies · Hertfordshire

Automatic entrance lobbies in Rickmansworth

Planning a new entrance or a refit in Rickmansworth? A lobby is easier to design in at the start than to squeeze in later. We can work with your architect or contractor and quote the doors, screens and controls as one package.

Town
Rickmansworth
Area
Hertfordshire
Postcodes
WD3
Guide price
Typically £14,995 to £34,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Rickmansworth and nearby

We do not keep premises in Rickmansworth. Instead, enquiries about automatic entrance lobbies come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the WD3 postcode district on a date that suits the site.

Many buildings in Rickmansworth are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.

Nearby towns we also list for automatic entrance lobbies (straight-line distance): Watford (3.7 miles), Chalfont St Peter (4.0 miles), Gerrards Cross (5.0 miles), Bushey (5.0 miles), Ruislip (5.1 miles), Uxbridge (6.2 miles).

What to think about for automatic entrance lobbies in Rickmansworth

  • Entrances in Rickmansworth that face the prevailing wind lose the most heat and take the most rain. A deeper lobby, or a right-angle layout that turns the inner doors away from the wind, makes the biggest difference there.
  • If the lobby is on an escape route, the fire strategy decides what both door sets do on alarm. Sequencing and interlocks must release so nothing stops people leaving.
  • Surgeries and clinics in Rickmansworth need lobbies wide and deep enough for wheelchairs, mobility scooters and people with walking frames. Avoid interlocks at public entrances unless there is a strong security reason for them.
  • Plan for a recessed matting well across the lobby floor. Wet shoes on a hard floor are a slip risk, and loose mats can trip people or upset floor-level sensors.
  • Where an over-door heater is fitted, check its settings once the lobby is working. Many buildings find the heater can run at a lower setting afterwards.

Automatic entrance lobbies in Rickmansworth: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £14,995 to £34,995 ex VAT.

ItemGuide priceNotes
Draught lobby: two sets of automatic sliding doors and glazed screens£14,995 – £34,995doors and screens, installed, ex VAT
Lobby with curtain walling or building workPriced on surveylarger public-sector lobbies have cost £50,000 or more
Card or fob reader tied into the door£795 – £2,495per door, ex VAT
Battery backup for power-cut operation£395 – £695per door, ex VAT

Lobby prices cover the doors and glazed screens. Building work, flooring, heating and curtain walling are priced on survey.

Standards and rules in England

In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking. Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic entrance lobbies and book a survey in Rickmansworth.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

Want a warmer, cleaner entrance in Rickmansworth? Send us a few photos and the opening sizes, and we will arrange a site survey and a written quote.

Automatic entrance lobbies in Rickmansworth: questions

Will our entrance in Rickmansworth have to close while the lobby is built?

Not for the whole job in most cases. We plan the order of work so one set of doors, or a temporary door, keeps the entrance usable, and agree any out-of-hours working in the quote. A short closure may be needed when the final set is commissioned.

What will automatic entrance lobbies in Rickmansworth cost?

Our guide is £14,995 to £34,995 excluding VAT (per lobby, doors and screens), the same guide prices we use across the UK. The free site survey in Rickmansworth confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can the lobby doors in Rickmansworth be locked at night?

Yes. The outer set is usually locked out of hours, and the inner set can be locked too. Locks and any access control are wired to release on the fire alarm where the fire strategy requires, and the settings are recorded at handover.

Do you design lobbies for new buildings in Rickmansworth?

Yes. We can work from the architect's drawings, suggest door types and depth, and quote the doors, screens and controls as one package for the main contractor or the client. Designing the lobby in at the start is usually simpler and cheaper than adding it later.

Do I need permission from a landlord or the council before work in Rickmansworth?

It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.

What does the free site survey in Rickmansworth involve?

An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automatic entrance lobbies, with drawings where the door type needs them.

Who is responsible for automatic doors on escape routes in Rickmansworth?

Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.

Next step

Automatic entrance lobbies in Rickmansworth

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.