Covering Keith and nearby
We do not keep premises in Keith. Instead, enquiries about automatic door repairs come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the AB55 postcode district on a date that suits the site.
Parking on a busy high street can be tight. When work is booked in Keith, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.
Nearby towns we also list for automatic door repairs (straight-line distance): Buckie (9.6 miles), Elgin (15.8 miles), Forres (25.4 miles), Inverurie (27.5 miles).
What to think about for automatic door repairs in Keith
- A door with battery backup may show a fault, or fail to open in a power cut, when its battery is worn out. Batteries are a routine replacement part rather than a major repair.
- Rule out the simple things. Check whether the door's isolator or fused spur has been switched off, and whether other equipment on the same circuit has also stopped working.
- Older shopfronts in Keith may have automatic doors with discontinued drive units. Ask whether parts are still available before agreeing to a large repair, as a new operator may be better value.
- Opening hours matter when booking a repair in Keith. If your premises close early or open late, mention it so the engineer can work while the entrance is quiet.
- Leisure centres, schools and public buildings in Keith may need a contractor induction or permit before work starts. Send any site rules with your booking so the visit can go ahead first time.
Automatic door repairs in Keith: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: from £95 ex VAT (£114 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Repair visit including the first hour, standard hours | £95 – £195 | ex VAT; homes £114 – £234 inc VAT |
| Repair visit, evenings and weekends | £195 – £300 | ex VAT; homes £234 – £360 inc VAT |
| Additional labour | £65 – £95 | per hour, ex VAT; homes £78 – £114 inc VAT |
| Sensor replacement | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Drive belt replacement | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Rollers, carriage wheels or floor guides | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Door off track or realignment | £125 – £345 | ex VAT; homes £150 – £414 inc VAT |
| Controller (control board) replacement | £395 – £895 | fitted, ex VAT; homes £474 – £1,074 inc VAT |
| Motor or gearbox replacement | £695 – £1,395 | fitted, ex VAT; homes £834 – £1,674 inc VAT |
The visit price is agreed in writing before an engineer attends. Parts and further work are quoted before they are done. Prices for faulty parts depend on the make and model of the door.
Standards and rules in Scotland
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them. Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible.
How it works
- Share the details. Send the address in Keith, the door type and make if you know it, and a description or video of the problem. For servicing, tell us how many doors there are and how busy each one is.
- Price confirmed in writing. We agree the visit price in writing before an engineer attends. Some straightforward repairs can be priced in full from photos and the make and model of the door.
- Diagnosis and repair. A specialist engineer attends on the agreed date, finds the cause, repairs or services the door, and tests its operation, sensors and safety functions with reference to BS EN 16005.
- Written record. Each visit ends with a written record for your files. Anything still outstanding, such as parts on order or recommended upgrades, is quoted before any further work is done.
Book a repair visit in Keith with the price settled up front. Parts and any further work are quoted to you before the engineer goes ahead.
Automatic door repairs in Keith: questions
Can you repair revolving doors in Keith?
Yes. The engineers we send work on automatic and manual revolving doors as well as sliding and swing doors. Revolving doors have extra safety devices, such as stop buttons and edge sensors, which are all tested after a repair. Parts for some revolving doors take longer to source, so photos of the drive and control panel help us prepare.
What will automatic door repairs in Keith cost?
Our guide starts from £95 excluding VAT (visit including the first hour), the same guide price we use across the UK. For homes that is from £114 including VAT. We agree the visit price in writing before an engineer attends in Keith, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Do engineers carry spare parts for doors in Keith?
Engineers carry common parts such as sensors, belts and some rollers. Controllers, motors and parts for less common doors are ordered once the fault is confirmed, and delivery is typically 1 to 3 weeks. Knowing the make and model in advance improves the chance of a repair during the first visit.
Do you repair automatic doors in Keith?
Yes. We take the booking, agree the price and manage the job, and the visit in Keith is made by a specialist automatic door engineer working under our management. The engineers we send work on sliding, swing, folding and revolving doors from most makers, including doors we did not install. The visit price is confirmed with you in writing before the engineer is booked.
How is the visit price set for work in Keith?
We agree the visit price with you in writing before an engineer attends. It is based on the type of door, the work requested and the location. If parts or further work are needed once the engineer has found the cause, those are quoted before they are done, so the cost never moves without your agreement.
What happens during a visit in Keith?
The engineer checks how the door is operating, diagnoses the fault or carries out the service, and tests the safety sensors and other functions before leaving. On a service visit that includes cleaning, adjustment and lubrication where needed. Anything that cannot be put right on the visit, or that needs parts, is explained and quoted before further work goes ahead.
Is a building warrant needed for a new automatic entrance in Keith?
Often, yes. Most building work in Scotland needs a building warrant before it starts, and the non-domestic Technical Handbook sets out what an accessible entrance should provide, including a clear opening of at least 800 mm. We tell you at the survey if your job is likely to need one.