Covering Bishop Auckland and nearby
Homes, businesses and public buildings throughout the DL14 postcode district can arrange automatic door repairs with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Bishop Auckland for the job rather than working from premises in town.
Older shopfronts are common in market towns, and some in Bishop Auckland may sit in a conservation area or a listed building. Changes to a frontage can need planning permission or listed building consent, so it is worth checking with the local planning authority before work is booked.
Nearby towns we also list for automatic door repairs (straight-line distance): Spennymoor (4.2 miles), Newton Aycliffe (4.9 miles), Durham (9.3 miles), Darlington (10.4 miles), Chester-le-Street (14.6 miles), Stanley (14.7 miles).
What to think about for automatic door repairs in Bishop Auckland
- For surgeries, clinics and care settings in Bishop Auckland, a door that will not open can stop wheelchair users getting in. Plan an alternative accessible entrance and clear signs while the repair is arranged.
- Wet and windy weather causes many false openings. Sensors over exposed entrances can react to rain and blowing leaves, and a small change to the detection zone often cures it.
- Rule out the simple things. Check whether the door's isolator or fused spur has been switched off, and whether other equipment on the same circuit has also stopped working.
- Leisure centres, schools and public buildings in Bishop Auckland may need a contractor induction or permit before work starts. Send any site rules with your booking so the visit can go ahead first time.
- Shopping parades and business parks in Bishop Auckland can have restricted parking or loading. Tell us where an engineer can park and unload tools when you book the visit.
Automatic door repairs in Bishop Auckland: guide prices
The visit price is agreed in writing before an engineer attends; parts and any further work are quoted before they are done. Guide price: from £95 ex VAT (£114 inc VAT).
| Item | Guide price | Notes |
|---|---|---|
| Repair visit including the first hour, standard hours | £95 – £195 | ex VAT; homes £114 – £234 inc VAT |
| Repair visit, evenings and weekends | £195 – £300 | ex VAT; homes £234 – £360 inc VAT |
| Additional labour | £65 – £95 | per hour, ex VAT; homes £78 – £114 inc VAT |
| Sensor replacement | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Drive belt replacement | £145 – £345 | fitted, ex VAT; homes £174 – £414 inc VAT |
| Rollers, carriage wheels or floor guides | £195 – £495 | fitted, ex VAT; homes £234 – £594 inc VAT |
| Door off track or realignment | £125 – £345 | ex VAT; homes £150 – £414 inc VAT |
| Controller (control board) replacement | £395 – £895 | fitted, ex VAT; homes £474 – £1,074 inc VAT |
| Motor or gearbox replacement | £695 – £1,395 | fitted, ex VAT; homes £834 – £1,674 inc VAT |
The visit price is agreed in writing before an engineer attends. Parts and further work are quoted before they are done. Prices for faulty parts depend on the make and model of the door.
Standards and rules in England
No law sets a fixed service interval. We recommend that a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer’s instructions and how heavily the door is used, and that someone on site carries out simple regular checks and keeps a record.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance. HSE guidance on those regulations says the frequency of maintenance depends on the equipment and the manufacturer’s information.
How it works
- Make contact. Phone, email or use the form. Tell us the type of door, what it is doing and whether it is safe to use, so the right visit for automatic door repairs can be planned.
- Written visit price. The cost of attending is agreed in writing before the visit is booked. For a planned service or inspection, the price per door and what each visit includes are set out at the same time.
- On-site work. The engineer, working under our management, checks the door from end to end, deals with the fault or the service, and tests every safety function and sensor setting before signing the door off.
- Report and quote. You receive a report of the findings. Where a repair, part or upgrade is recommended, it is quoted in writing so you can decide, and the door is left in a safe state if it cannot be used.
For a written repair price in Bishop Auckland, tell us the make of the door, what it is doing and whether it is stuck open, stuck shut or unsafe.
Automatic door repairs in Bishop Auckland: questions
Is it safe to keep using a faulty automatic door in Bishop Auckland?
It depends on the fault. A slow or noisy door may be safe to use until the visit, but a door that strikes people, closes unexpectedly or has damaged glass should be switched off and kept clear. If you are unsure, switch it off and use another entrance until an engineer has checked it.
How much should I budget for automatic door repairs in Bishop Auckland?
Our guide starts from £95 excluding VAT (visit including the first hour), the same guide price we use across the UK. For homes that is from £114 including VAT. We agree the visit price in writing before an engineer attends in Bishop Auckland, and quote any parts or further work before doing them. The price guide lists typical repair and service costs.
Can you repair revolving doors in Bishop Auckland?
Yes. The engineers we send work on automatic and manual revolving doors as well as sliding and swing doors. Revolving doors have extra safety devices, such as stop buttons and edge sensors, which are all tested after a repair. Parts for some revolving doors take longer to source, so photos of the drive and control panel help us prepare.
How soon can an engineer get to my door in Bishop Auckland?
That depends on engineer availability around Bishop Auckland when you contact us, so we do not promise a time. Tell us whether the door is stuck open, stuck shut or unsafe, and we will tell you the earliest visit we can offer. Meanwhile, set the door to a safe mode and keep people away from the leaves.
Are parts quoted before they are fitted?
Always. If a repair or service in Bishop Auckland needs parts, such as rollers, belts, sensors, a control board or a motor, we quote them in writing first. Some common parts may be on the engineer's van; others are ordered once you accept the quote and fitted on a return visit at a price already agreed.
Can visits in Bishop Auckland be arranged outside working hours?
Yes, where the site needs it. Early-morning, evening and weekend visits can be arranged for shops, surgeries and offices that cannot lose their entrance during the day. Any difference in price for out-of-hours attendance is agreed in writing before the visit is booked, alongside the standard visit price.
Which building regulations apply to a new automatic entrance in Bishop Auckland?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.