Covering Lowestoft and nearby
If your building is in Lowestoft, or anywhere in the NR32 and NR33 postcode districts, we can arrange automatic door refurbishment. Visits are booked with you in advance, timed around opening hours where that matters, and carried out by engineers who work under our management.
Around Lowestoft there is usually a mix of retail parks, business parks and town-centre shops, each with different door needs. A retail park unit may need a wide bi-parting door for trolleys, while a town-centre shop often has a narrow frontage better suited to a single slider or a folding door.
Nearby towns we also list for automatic door refurbishment (straight-line distance): Gorleston-on-Sea (6.8 miles), Great Yarmouth (9.2 miles), Norwich (21.8 miles), Wymondham (27.5 miles).
What to think about for automatic door refurbishment in Lowestoft
- Care settings in Lowestoft benefit from level thresholds and smooth-running leaves that do not snag walking frames, trolleys or wheelchair footplates as people pass through.
- Office blocks and business parks in Lowestoft with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
- Listed buildings and conservation areas can limit changes to how the frame looks. Refurbishment within the existing frame usually avoids those issues and any need for consent.
- Busy retail units in Lowestoft may prefer the work done in stages, one leaf at a time, so the entrance stays open throughout trading hours.
- After refurbishment, sensors and speeds are reset to suit the new parts. Keep the test record with your service history so later engineers can see what was done.
Automatic door refurbishment in Lowestoft: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Running gear refresh: rollers, guides, brushes and seals | £395 – £895 | per door, ex VAT |
| Track overhaul | £395 – £895 | per door, ex VAT |
| Replacement glass leaf | from £495 | each, ex VAT; size and glass type on survey |
| Full refurbishment of a sliding door | £1,495 – £2,995 | running gear, seals, guides and one leaf, ex VAT |
Standards and rules in England
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic door refurbishment and book a survey in Lowestoft.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Get in touch about automatic door refurbishment in Lowestoft. The work can be planned in stages to keep your entrance open while it is done.
Automatic door refurbishment in Lowestoft: questions
Do you refurbish automatic doors in Lowestoft?
Yes. Refurbishment work in Lowestoft is planned and priced by us, then carried out by automatic door engineers and glaziers working under our management. There is no charge for the survey, and you receive a fixed quote with each item priced separately, from new glass and rollers to seals, floor guides, the threshold and frame refinishing.
What will automatic door refurbishment in Lowestoft cost?
Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Lowestoft confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you refinish the frame of our door in Lowestoft?
Yes. Aluminium frames can be cleaned, repaired and recoated on site to refresh their colour. Badly damaged sections may need replacing rather than refinishing. Refinishing is listed separately in the quote, so you can decide whether to include it now or leave it for a later phase.
Is it worth refurbishing an old door at our premises in Lowestoft?
If the frame is sound and the opening size still works, usually yes, as refurbishment costs far less than a new door. If the frame is corroded, the glass is not safety glass or the opening is too narrow, a new door may be better value, and the survey tells you which.
Do I need permission from a landlord or the council before work in Lowestoft?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
What is the lead time for automatic door refurbishment in Lowestoft?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
Who is responsible for automatic doors on escape routes in Lowestoft?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.