UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic door refurbishment · Stirling, Falkirk and Clackmannanshire

Automatic door refurbishment in Falkirk

Shopfronts and office entrances in Falkirk take a lot of wear. We refurbish automatic doors with new running gear, glass leaves and weather seals, and can refinish tired aluminium frames while keeping the existing structure in place.

Town
Falkirk
Area
Stirling, Falkirk and Clackmannanshire
Postcodes
FK1
Guide price
From £395 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Falkirk and nearby

Requests for automatic door refurbishment in Falkirk are handled by us and passed to a specialist engineer working under our management. Coverage includes the FK1 postcode district: town-centre premises, business and retail sites, public buildings and residential streets alike.

Older shopfronts are common in market towns, and some in Falkirk may sit in a conservation area or a listed building. Changes to a frontage can need planning permission or listed building consent, so it is worth checking with the local planning authority before work is booked.

Nearby towns we also list for automatic door refurbishment (straight-line distance): Stenhousemuir (2.0 miles), Larbert (2.2 miles), Grangemouth (2.5 miles), Bo'ness (6.6 miles), Linlithgow (7.2 miles), Alloa (7.9 miles).

What to think about for automatic door refurbishment in Falkirk

  • If the operator is close to the end of its life, refurbishing the running gear while fitting a new drive unit saves a second visit and a second set-up.
  • Office blocks and business parks in Falkirk with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
  • Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
  • Glass and made-to-measure leaves are typically 2 to 4 weeks from order. Plan the work around that lead time, especially if a damaged leaf is temporarily boarded.
  • After refurbishment, sensors and speeds are reset to suit the new parts. Keep the test record with your service history so later engineers can see what was done.

Automatic door refurbishment in Falkirk: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.

ItemGuide priceNotes
Running gear refresh: rollers, guides, brushes and seals£395 – £895per door, ex VAT
Track overhaul£395 – £895per door, ex VAT
Replacement glass leaffrom £495each, ex VAT; size and glass type on survey
Full refurbishment of a sliding door£1,495 – £2,995running gear, seals, guides and one leaf, ex VAT

Standards and rules in Scotland

Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Falkirk.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Book a free refurbishment survey in Falkirk. We will check the frame, leaves and running gear, then price each item separately on a fixed quote.

Automatic door refurbishment in Falkirk: questions

Can you replace a single broken glass leaf in Falkirk?

Yes. The leaf is made safe, measured and reglazed with new safety glass, or replaced completely if its frame is damaged. New glass is typically 2 to 4 weeks from order. Once the leaf is rehung, the door is set up again and the track and floor guide are checked.

What is the guide price for automatic door refurbishment in Falkirk?

Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Falkirk confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you refinish the frame of our door in Falkirk?

Yes. Aluminium frames can be cleaned, repaired and recoated on site to refresh their colour. Badly damaged sections may need replacing rather than refinishing. Refinishing is listed separately in the quote, so you can decide whether to include it now or leave it for a later phase.

Will our entrance in Falkirk stay open during refurbishment?

Often, at least in part. Many jobs can be done one leaf at a time, and the work can be planned for quieter hours. If the entrance does need to close, the quote says for how long, so you can arrange another way in for staff and visitors.

What happens once the installation in Falkirk is finished?

The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.

What do you need from us for parking and access in Falkirk?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

Who is responsible for automatic doors on escape routes in Falkirk?

The person responsible for fire safety under the Fire (Scotland) Act 2005 for those premises. Scottish guidance allows automatic doors on escape routes only where they fail safely to outward opening or have a monitored fail-safe system that opens them on power failure, sensor failure and fire alarm.

Next step

Automatic door refurbishment in Falkirk

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.