UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic door refurbishment · Staffordshire

Automatic door refurbishment in Lichfield

We refurbish automatic sliding, swing and folding doors for clients in Lichfield and across England. Each job is carried out by specialist engineers working under our management, and the door is set up and tested again once the new parts are in.

Town
Lichfield
Area
Staffordshire
Postcodes
WS13, WS14
Guide price
From £395 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Lichfield and nearby

We do not keep premises in Lichfield. Instead, enquiries about automatic door refurbishment come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the WS13 and WS14 postcode districts on a date that suits the site.

Many buildings in Lichfield are older, with timber frames, thick walls, steps or uneven thresholds. These affect where an operator and sensors can go, and the engineer checks them on site before anything is fitted or adjusted.

Nearby towns we also list for automatic door refurbishment (straight-line distance): Burntwood (4.3 miles), Tamworth (6.3 miles), Aldridge (6.5 miles), Rugeley (7.1 miles), Sutton Coldfield (7.9 miles), Cannock (8.6 miles).

What to think about for automatic door refurbishment in Lichfield

  • High street doors in Lichfield often have scratched or etched glass from years of cleaning and graffiti. Replacing leaves with new safety glass restores a clean look.
  • Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
  • Office blocks and business parks in Lichfield with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
  • Busy retail units in Lichfield may prefer the work done in stages, one leaf at a time, so the entrance stays open throughout trading hours.
  • Exposed entrances in Lichfield suffer most from worn seals and brush strips. New weatherproofing can cut draughts and noise noticeably, especially on doors facing the prevailing wind.

Automatic door refurbishment in Lichfield: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.

ItemGuide priceNotes
Running gear refresh: rollers, guides, brushes and seals£395 – £895per door, ex VAT
Track overhaul£395 – £895per door, ex VAT
Replacement glass leaffrom £495each, ex VAT; size and glass type on survey
Full refurbishment of a sliding door£1,495 – £2,995running gear, seals, guides and one leaf, ex VAT

Standards and rules in England

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Lichfield.
  2. Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
  3. Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
  4. Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.

Cracked glass, worn rollers or draughty seals at your entrance in Lichfield? Book a free survey and choose the work that matters most to you.

Automatic door refurbishment in Lichfield: questions

Can you replace a single broken glass leaf in Lichfield?

Yes. The leaf is made safe, measured and reglazed with new safety glass, or replaced completely if its frame is damaged. New glass is typically 2 to 4 weeks from order. Once the leaf is rehung, the door is set up again and the track and floor guide are checked.

Can you give me a price for automatic door refurbishment in Lichfield?

Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Lichfield confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Will our entrance in Lichfield stay open during refurbishment?

Often, at least in part. Many jobs can be done one leaf at a time, and the work can be planned for quieter hours. If the entrance does need to close, the quote says for how long, so you can arrange another way in for staff and visitors.

Do you refurbish automatic doors in Lichfield?

Yes. Refurbishment work in Lichfield is planned and priced by us, then carried out by automatic door engineers and glaziers working under our management. There is no charge for the survey, and you receive a fixed quote with each item priced separately, from new glass and rollers to seals, floor guides, the threshold and frame refinishing.

What do you need from us for parking and access in Lichfield?

Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.

How are payments structured for work in Lichfield?

Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.

Which building regulations apply to a new automatic entrance in Lichfield?

In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.

Next step

Automatic door refurbishment in Lichfield

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.