Covering Sheffield and nearby
Homes, businesses and public buildings throughout the S1, S2, S3, S4, S7 and S11 postcode districts can arrange automatic door refurbishment with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Sheffield for the job rather than working from premises in town.
Hospitals, universities and large public buildings in and around Sheffield often have dozens of automatic doors on one estate, from main entrances to ward and corridor doors. Grouping surveys, servicing and inspections across a site keeps records in one place and visits efficient.
Nearby towns we also list for automatic door refurbishment (straight-line distance): Rotherham (5.6 miles), Dronfield (5.6 miles), Chapeltown (5.7 miles), Rawmarsh (7.3 miles), Staveley (9.4 miles), Chesterfield (9.4 miles).
What to think about for automatic door refurbishment in Sheffield
- Glass and made-to-measure leaves are typically 2 to 4 weeks from order. Plan the work around that lead time, especially if a damaged leaf is temporarily boarded.
- Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
- High street doors in Sheffield often have scratched or etched glass from years of cleaning and graffiti. Replacing leaves with new safety glass restores a clean look.
- Office blocks and business parks in Sheffield with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
- Busy retail units in Sheffield may prefer the work done in stages, one leaf at a time, so the entrance stays open throughout trading hours.
Automatic door refurbishment in Sheffield: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Running gear refresh: rollers, guides, brushes and seals | £395 – £895 | per door, ex VAT |
| Track overhaul | £395 – £895 | per door, ex VAT |
| Replacement glass leaf | from £495 | each, ex VAT; size and glass type on survey |
| Full refurbishment of a sliding door | £1,495 – £2,995 | running gear, seals, guides and one leaf, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
How it works
- Start with a short enquiry. Use the form, phone or email. Tell us whether the work is a new door, an upgrade or an opener for a home, and we arrange the next step for your site in Sheffield.
- Measured survey. The free survey confirms what will fit and what the entrance needs: opening width, door type, activation, safety sensors and behaviour on power loss or fire alarm, matched to how the building is used.
- Written price, no surprises. A fixed, itemised quote sets out the specification, the work involved, the expected lead time and the warranty terms. You can ask questions or change the specification before accepting it.
- Installed and commissioned. The door is installed with as little disruption as possible, then set up and tested for its hazard zones. Before leaving, the engineer explains the controls and hands over the documents for your records.
Book a free refurbishment survey in Sheffield. We will check the frame, leaves and running gear, then price each item separately on a fixed quote.
Automatic door refurbishment in Sheffield: questions
Do you set up the door again after refurbishing it in Sheffield?
Yes. New running parts change how the leaves move, so speeds, sensor zones and obstacle detection are checked and reset before handover. You receive a record of the parts fitted and the test results to keep with the door's service history.
What is the guide price for automatic door refurbishment in Sheffield?
Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Sheffield confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can you replace a single broken glass leaf in Sheffield?
Yes. The leaf is made safe, measured and reglazed with new safety glass, or replaced completely if its frame is damaged. New glass is typically 2 to 4 weeks from order. Once the leaf is rehung, the door is set up again and the track and floor guide are checked.
Do you refurbish automatic doors in Sheffield?
Yes. Refurbishment work in Sheffield is planned and priced by us, then carried out by automatic door engineers and glaziers working under our management. There is no charge for the survey, and you receive a fixed quote with each item priced separately, from new glass and rollers to seals, floor guides, the threshold and frame refinishing.
What is the lead time for automatic door refurbishment in Sheffield?
Lead times depend on the door type and what has to be made to order. As a guide, operators and accessible door kits are typically two to four weeks from order, and complete sliding entrances typically four to eight weeks from drawing approval. Curved, revolving and hermetic doors usually take longer. The expected lead time is stated in your quote.
What power supply is needed for automatic door refurbishment in Sheffield?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Who is responsible for automatic doors on escape routes in Sheffield?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.