UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic door refurbishment · Somerset

Automatic door refurbishment in Clevedon

Shopfronts and office entrances in Clevedon take a lot of wear. We refurbish automatic doors with new running gear, glass leaves and weather seals, and can refinish tired aluminium frames while keeping the existing structure in place.

Town
Clevedon
Area
Somerset
Postcodes
BS21
Guide price
From £395 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Clevedon and nearby

For automatic door refurbishment, coverage around Clevedon is set by postcode and includes the BS21 postcode district, as well as nearby addresses in Somerset. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.

Parking on a busy high street can be tight. When work is booked in Clevedon, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.

Nearby towns we also list for automatic door refurbishment (straight-line distance): Nailsea (4.3 miles), Portishead (4.7 miles), Weston-super-Mare (8.4 miles), Clifton (10.3 miles), Caldicot (10.9 miles), Bedminster (11.0 miles).

What to think about for automatic door refurbishment in Clevedon

  • Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
  • Busy retail units in Clevedon may prefer the work done in stages, one leaf at a time, so the entrance stays open throughout trading hours.
  • After refurbishment, sensors and speeds are reset to suit the new parts. Keep the test record with your service history so later engineers can see what was done.
  • Office blocks and business parks in Clevedon with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
  • Care settings in Clevedon benefit from level thresholds and smooth-running leaves that do not snag walking frames, trolleys or wheelchair footplates as people pass through.

Automatic door refurbishment in Clevedon: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.

ItemGuide priceNotes
Running gear refresh: rollers, guides, brushes and seals£395 – £895per door, ex VAT
Track overhaul£395 – £895per door, ex VAT
Replacement glass leaffrom £495each, ex VAT; size and glass type on survey
Full refurbishment of a sliding door£1,495 – £2,995running gear, seals, guides and one leaf, ex VAT

Standards and rules in England

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Clevedon and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on automatic door refurbishment separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Before replacing an automatic door in Clevedon, ask us to price refurbishment. The survey is free and shows exactly what is worth keeping.

Automatic door refurbishment in Clevedon: questions

Do you refurbish automatic doors in Clevedon?

Yes. Refurbishment work in Clevedon is planned and priced by us, then carried out by automatic door engineers and glaziers working under our management. There is no charge for the survey, and you receive a fixed quote with each item priced separately, from new glass and rollers to seals, floor guides, the threshold and frame refinishing.

What is the guide price for automatic door refurbishment in Clevedon?

Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Clevedon confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you refurbish a door in Clevedon that another company installed?

Yes. We refurbish doors whoever fitted them. The survey identifies the door system, and matching or equivalent rollers, guides, seals and glass are then sourced for it. If a part is no longer made, the quote explains the alternative.

Is it worth refurbishing an old door at our premises in Clevedon?

If the frame is sound and the opening size still works, usually yes, as refurbishment costs far less than a new door. If the frame is corroded, the glass is not safety glass or the opening is too narrow, a new door may be better value, and the survey tells you which.

What should I send before the survey in Clevedon?

A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for automatic door refurbishment together more easily.

How are payments structured for work in Clevedon?

Payment stages are set out in the quote before you accept it. Larger or made-to-order jobs may involve a deposit and a balance on completion, while smaller jobs may be invoiced once the work is finished. Nothing is charged for the survey itself, and the terms you accept are the terms that apply.

Do businesses in Clevedon have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Automatic door refurbishment in Clevedon

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.