UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic door refurbishment · Nottinghamshire

Automatic door refurbishment in Carlton

Broken glass leaf in Carlton? We make it safe, measure for new safety glass and rehang the leaf, then check the track and floor guide for knock-on damage. The survey costs nothing and the quote is fixed.

Town
Carlton
Area
Nottinghamshire
Postcodes
NG4
Guide price
From £395 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Carlton and nearby

Requests for automatic door refurbishment in Carlton are handled by us and passed to a specialist engineer working under our management. Coverage includes the NG4 postcode district: town-centre premises, business and retail sites, public buildings and residential streets alike.

Libraries, health centres and council buildings in Carlton still need accessible entrances, whatever their size. A single automatic door with a push pad or touch-free switch is often enough to give everyone easy access.

Nearby towns we also list for automatic door refurbishment (straight-line distance): Arnold (2.8 miles), Nottingham (2.9 miles), West Bridgford (3.2 miles), Hucknall (6.4 miles), Beeston (6.5 miles), Eastwood (9.1 miles).

What to think about for automatic door refurbishment in Carlton

  • Older shopfronts with discontinued door systems may need equivalent parts rather than exact matches. The survey identifies what is still available before anything is ordered.
  • High street doors in Carlton often have scratched or etched glass from years of cleaning and graffiti. Replacing leaves with new safety glass restores a clean look.
  • Floors around the door in Carlton may be worn or uneven. New floor guides and thresholds sometimes need small areas of making good, which the quote lists separately.
  • Exposed entrances in Carlton suffer most from worn seals and brush strips. New weatherproofing can cut draughts and noise noticeably, especially on doors facing the prevailing wind.
  • If the operator is close to the end of its life, refurbishing the running gear while fitting a new drive unit saves a second visit and a second set-up.

Automatic door refurbishment in Carlton: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.

ItemGuide priceNotes
Running gear refresh: rollers, guides, brushes and seals£395 – £895per door, ex VAT
Track overhaul£395 – £895per door, ex VAT
Replacement glass leaffrom £495each, ex VAT; size and glass type on survey
Full refurbishment of a sliding door£1,495 – £2,995running gear, seals, guides and one leaf, ex VAT

Standards and rules in England

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Carlton and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on automatic door refurbishment separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Send us photos of the door that needs attention in Carlton, and we will arrange a survey at no cost and an itemised quote for the work.

Automatic door refurbishment in Carlton: questions

Is it worth refurbishing an old door at our premises in Carlton?

If the frame is sound and the opening size still works, usually yes, as refurbishment costs far less than a new door. If the frame is corroded, the glass is not safety glass or the opening is too narrow, a new door may be better value, and the survey tells you which.

Can you give me a price for automatic door refurbishment in Carlton?

Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Carlton confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Will our entrance in Carlton stay open during refurbishment?

Often, at least in part. Many jobs can be done one leaf at a time, and the work can be planned for quieter hours. If the entrance does need to close, the quote says for how long, so you can arrange another way in for staff and visitors.

Can you replace a single broken glass leaf in Carlton?

Yes. The leaf is made safe, measured and reglazed with new safety glass, or replaced completely if its frame is damaged. New glass is typically 2 to 4 weeks from order. Once the leaf is rehung, the door is set up again and the track and floor guide are checked.

Do I need permission from a landlord or the council before work in Carlton?

It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.

What does the free site survey in Carlton involve?

An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for automatic door refurbishment, with drawings where the door type needs them.

Do businesses in Carlton have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Automatic door refurbishment in Carlton

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.