UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic door refurbishment · Lincolnshire

Automatic door refurbishment in Lincoln

Planning a refresh of your building in Lincoln? Refurbishing the automatic door at the same time, with new glass, seals and a refinished frame, keeps the entrance in step with the rest of the work.

Town
Lincoln
Area
Lincolnshire
Postcodes
LN2, LN5, LN6
Guide price
From £395 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Lincoln and nearby

Engineers working under our management travel to addresses across the LN2, LN5 and LN6 postcode districts for automatic door refurbishment. There is no depot or showroom in Lincoln; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.

Housing providers and managing agents in Lincoln look after communal entrance doors that are used day and night. Reliable closing, good security and a written service record are usually the priorities, along with door entry or fob systems tied into the operator.

Nearby towns we also list for automatic door refurbishment (straight-line distance): Gainsborough (14.4 miles), Newark-on-Trent (16.0 miles), Sleaford (16.7 miles), Retford (18.0 miles), Grantham (22.2 miles), Louth (24.1 miles).

What to think about for automatic door refurbishment in Lincoln

  • Exposed entrances in Lincoln suffer most from worn seals and brush strips. New weatherproofing can cut draughts and noise noticeably, especially on doors facing the prevailing wind.
  • Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
  • After refurbishment, sensors and speeds are reset to suit the new parts. Keep the test record with your service history so later engineers can see what was done.
  • Older shopfronts with discontinued door systems may need equivalent parts rather than exact matches. The survey identifies what is still available before anything is ordered.
  • High street doors in Lincoln often have scratched or etched glass from years of cleaning and graffiti. Replacing leaves with new safety glass restores a clean look.

Automatic door refurbishment in Lincoln: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.

ItemGuide priceNotes
Running gear refresh: rollers, guides, brushes and seals£395 – £895per door, ex VAT
Track overhaul£395 – £895per door, ex VAT
Replacement glass leaffrom £495each, ex VAT; size and glass type on survey
Full refurbishment of a sliding door£1,495 – £2,995running gear, seals, guides and one leaf, ex VAT

Standards and rules in England

Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.

Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

How it works

  1. Describe what you need. Whether the job is automatic door refurbishment for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Lincoln.
  2. Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
  3. Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
  4. Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.

Before replacing an automatic door in Lincoln, ask us to price refurbishment. The survey is free and shows exactly what is worth keeping.

Automatic door refurbishment in Lincoln: questions

Can you refurbish a door in Lincoln that another company installed?

Yes. We refurbish doors whoever fitted them. The survey identifies the door system, and matching or equivalent rollers, guides, seals and glass are then sourced for it. If a part is no longer made, the quote explains the alternative.

How much should I budget for automatic door refurbishment in Lincoln?

Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Lincoln confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you refinish the frame of our door in Lincoln?

Yes. Aluminium frames can be cleaned, repaired and recoated on site to refresh their colour. Badly damaged sections may need replacing rather than refinishing. Refinishing is listed separately in the quote, so you can decide whether to include it now or leave it for a later phase.

Is it worth refurbishing an old door at our premises in Lincoln?

If the frame is sound and the opening size still works, usually yes, as refurbishment costs far less than a new door. If the frame is corroded, the glass is not safety glass or the opening is too narrow, a new door may be better value, and the survey tells you which.

What should I send before the survey in Lincoln?

A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for automatic door refurbishment together more easily.

Can installation in Lincoln happen outside opening hours?

Yes. Many shops, surgeries and offices prefer work early in the morning, in the evening or at weekends, when the entrance is quietest. Tell us your constraints when you enquire and they are built into the plan. Any extra cost for out-of-hours work is shown in the written quote rather than added afterwards.

Which building regulations apply to a new automatic entrance in Lincoln?

In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.

Next step

Automatic door refurbishment in Lincoln

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.