Covering Ashton-under-Lyne and nearby
Engineers working under our management travel to addresses across the OL6 and OL7 postcode districts for automatic door refurbishment. There is no depot or showroom in Ashton-under-Lyne; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Independent businesses in Ashton-under-Lyne often have one entrance and cannot close for long. Work is usually scheduled early, late or on a quiet day, and where a door must be out of use for a period, we plan to keep the entrance usable or secure.
Nearby towns we also list for automatic door refurbishment (straight-line distance): Dukinfield (1.1 miles), Stalybridge (1.7 miles), Droylsden (2.0 miles), Denton (2.3 miles), Hyde (2.7 miles), Failsworth (3.0 miles).
What to think about for automatic door refurbishment in Ashton-under-Lyne
- Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
- Floors around the door in Ashton-under-Lyne may be worn or uneven. New floor guides and thresholds sometimes need small areas of making good, which the quote lists separately.
- Listed buildings and conservation areas can limit changes to how the frame looks. Refurbishment within the existing frame usually avoids those issues and any need for consent.
- Busy retail units in Ashton-under-Lyne may prefer the work done in stages, one leaf at a time, so the entrance stays open throughout trading hours.
- High street doors in Ashton-under-Lyne often have scratched or etched glass from years of cleaning and graffiti. Replacing leaves with new safety glass restores a clean look.
Automatic door refurbishment in Ashton-under-Lyne: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Running gear refresh: rollers, guides, brushes and seals | £395 – £895 | per door, ex VAT |
| Track overhaul | £395 – £895 | per door, ex VAT |
| Replacement glass leaf | from £495 | each, ex VAT; size and glass type on survey |
| Full refurbishment of a sliding door | £1,495 – £2,995 | running gear, seals, guides and one leaf, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Get in touch. Call, email or use the form with the address and what you have in mind. If you are not sure which type of door suits, describe the entrance and we will suggest the options worth considering.
- Survey and advice. The survey costs nothing and carries no obligation. The engineer checks the site and explains which options suit the entrance, the people using it and the budget, before anything is priced.
- Quote in writing. You receive a fixed, itemised quote for automatic door refurbishment in Ashton-under-Lyne, covering equipment, installation, testing and handover, with the lead time and payment stages set out clearly.
- Install, test, explain. The engineer installs and commissions the door, tests the sensors, safety functions and emergency behaviour, and walks you through the controls. The handover pack records what was installed and tested.
Before replacing an automatic door in Ashton-under-Lyne, ask us to price refurbishment. The survey is free and shows exactly what is worth keeping.
Automatic door refurbishment in Ashton-under-Lyne: questions
Can refurbishment in Ashton-under-Lyne help with draughts and heating costs?
New seals and brush strips, and leaves that close fully, reduce draughts through a closed door. For very exposed entrances, a second set of doors forming a draught lobby may also be worth considering, and we can price both so you can compare the likely benefit.
How are prices worked out for automatic door refurbishment in Ashton-under-Lyne?
Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Ashton-under-Lyne confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you set up the door again after refurbishing it in Ashton-under-Lyne?
Yes. New running parts change how the leaves move, so speeds, sensor zones and obstacle detection are checked and reset before handover. You receive a record of the parts fitted and the test results to keep with the door's service history.
Is it worth refurbishing an old door at our premises in Ashton-under-Lyne?
If the frame is sound and the opening size still works, usually yes, as refurbishment costs far less than a new door. If the frame is corroded, the glass is not safety glass or the opening is too narrow, a new door may be better value, and the survey tells you which.
What should I send before the survey in Ashton-under-Lyne?
A few photos of the door from inside and outside, rough measurements of the opening, the address and a note of how the entrance is used. If the door already has an operator, a photo of any label on it helps. With that, the engineer arrives prepared, the survey takes less of your time and we can put the quote for automatic door refurbishment together more easily.
What happens to the old door when a new one is fitted in Ashton-under-Lyne?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Who is responsible for automatic doors on escape routes in Ashton-under-Lyne?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.