Covering Orpington and nearby
We cover the whole of the BR5 and BR6 postcode districts, along with nearby towns in Greater London. You book each visit for automatic door refurbishment directly with us, and a specialist automatic door engineer working under our management travels to your site on the agreed date.
Getting a van close to the door is often the hardest part of a London job. Red routes, controlled parking zones and loading rules vary from street to street, so access and parking restrictions are planned into the visit to Orpington before it is booked.
Nearby towns we also list for automatic door refurbishment (straight-line distance): Sidcup (3.6 miles), Swanley (3.6 miles), Bromley (4.2 miles), Eltham (5.6 miles), Beckenham (5.8 miles), Welling (6.1 miles).
What to think about for automatic door refurbishment in Orpington
- Frames near the coast or busy roads can corrode faster. The survey checks fixings and the bottom of the frame, where water and grit tend to collect.
- Office blocks and business parks in Orpington with several matching doors can refurbish them together for a consistent finish and a lower cost per door.
- Floors around the door in Orpington may be worn or uneven. New floor guides and thresholds sometimes need small areas of making good, which the quote lists separately.
- Older shopfronts with discontinued door systems may need equivalent parts rather than exact matches. The survey identifies what is still available before anything is ordered.
- High street doors in Orpington often have scratched or etched glass from years of cleaning and graffiti. Replacing leaves with new safety glass restores a clean look.
Automatic door refurbishment in Orpington: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Running gear refresh: rollers, guides, brushes and seals | £395 – £895 | per door, ex VAT |
| Track overhaul | £395 – £895 | per door, ex VAT |
| Replacement glass leaf | from £495 | each, ex VAT; size and glass type on survey |
| Full refurbishment of a sliding door | £1,495 – £2,995 | running gear, seals, guides and one leaf, ex VAT |
Standards and rules in England
Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.
Workplace law (the Workplace (Health, Safety and Welfare) Regulations 1992) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.
How it works
- Describe what you need. Whether the job is automatic door refurbishment for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Orpington.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Book a free refurbishment survey in Orpington. We will check the frame, leaves and running gear, then price each item separately on a fixed quote.
Automatic door refurbishment in Orpington: questions
Can refurbishment in Orpington help with draughts and heating costs?
New seals and brush strips, and leaves that close fully, reduce draughts through a closed door. For very exposed entrances, a second set of doors forming a draught lobby may also be worth considering, and we can price both so you can compare the likely benefit.
Can you give me a price for automatic door refurbishment in Orpington?
Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Orpington confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Do you set up the door again after refurbishing it in Orpington?
Yes. New running parts change how the leaves move, so speeds, sensor zones and obstacle detection are checked and reset before handover. You receive a record of the parts fitted and the test results to keep with the door's service history.
Can you replace a single broken glass leaf in Orpington?
Yes. The leaf is made safe, measured and reglazed with new safety glass, or replaced completely if its frame is damaged. New glass is typically 2 to 4 weeks from order. Once the leaf is rehung, the door is set up again and the track and floor guide are checked.
Can automatic doors be fitted to a listed building in Orpington?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Orpington is agreed before work starts.
Which building regulations apply to a new automatic entrance in Orpington?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.