UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Automatic door refurbishment · County Tyrone

Automatic door refurbishment in Cookstown

Planning a refresh of your building in Cookstown? Refurbishing the automatic door at the same time, with new glass, seals and a refinished frame, keeps the entrance in step with the rest of the work.

Town
Cookstown
Area
County Tyrone
Postcodes
BT80
Guide price
From £395 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Cookstown and nearby

Coverage for automatic door refurbishment runs across the BT80 postcode district and out into the surrounding parts of County Tyrone. Wherever the building is, the arrangements stay the same: one contracting party, a written price before work, and a specialist engineer working under our management on site.

Small offices, community centres and village halls around Cookstown tend to have one main entrance, often used by visitors who need level access without steps. Automating the existing door, rather than replacing it, is frequently the most practical and affordable route.

Nearby towns we also list for automatic door refurbishment (straight-line distance): Magherafelt (9.4 miles), Dungannon (9.7 miles), Portadown (19.4 miles), Craigavon (19.8 miles), Armagh (20.5 miles), Lurgan (20.5 miles).

What to think about for automatic door refurbishment in Cookstown

  • Busy retail units in Cookstown may prefer the work done in stages, one leaf at a time, so the entrance stays open throughout trading hours.
  • Glass and made-to-measure leaves are typically 2 to 4 weeks from order. Plan the work around that lead time, especially if a damaged leaf is temporarily boarded.
  • If the operator is close to the end of its life, refurbishing the running gear while fitting a new drive unit saves a second visit and a second set-up.
  • Care settings in Cookstown benefit from level thresholds and smooth-running leaves that do not snag walking frames, trolleys or wheelchair footplates as people pass through.
  • Floors around the door in Cookstown may be worn or uneven. New floor guides and thresholds sometimes need small areas of making good, which the quote lists separately.

Automatic door refurbishment in Cookstown: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £395 ex VAT.

ItemGuide priceNotes
Running gear refresh: rollers, guides, brushes and seals£395 – £895per door, ex VAT
Track overhaul£395 – £895per door, ex VAT
Replacement glass leaffrom £495each, ex VAT; size and glass type on survey
Full refurbishment of a sliding door£1,495 – £2,995running gear, seals, guides and one leaf, ex VAT

Standards and rules in Northern Ireland

Workplace law (the Workplace (Health, Safety and Welfare) Regulations (Northern Ireland) 1993) expects powered doors to have suitable and effective features to stop them trapping anyone and, where needed for safety, to open by hand unless they open automatically if the power fails. Doors at work must also be kept in efficient working order under a suitable system of maintenance.

Standards are not retrospective, so an older door does not become unlawful when a standard is updated; a site-specific risk assessment shows whether any upgrades are sensible. BS EN 16005 is the current standard for the safety in use of powered pedestrian doors, and BS 7036-0:2014 is the British code of practice for risk assessment and risk reduction used alongside it. Standards are not law in themselves, but they are the recognised benchmark for showing an automatic door is safe to use, and we set up, test and document doors with reference to them.

How it works

  1. Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for automatic door refurbishment and book a survey in Cookstown.
  2. Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
  3. Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
  4. Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.

Book a free refurbishment survey in Cookstown. We will check the frame, leaves and running gear, then price each item separately on a fixed quote.

Automatic door refurbishment in Cookstown: questions

Is it worth refurbishing an old door at our premises in Cookstown?

If the frame is sound and the opening size still works, usually yes, as refurbishment costs far less than a new door. If the frame is corroded, the glass is not safety glass or the opening is too narrow, a new door may be better value, and the survey tells you which.

Can you give me a price for automatic door refurbishment in Cookstown?

Our guide starts from £395 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Cookstown confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Can you refurbish a door in Cookstown that another company installed?

Yes. We refurbish doors whoever fitted them. The survey identifies the door system, and matching or equivalent rollers, guides, seals and glass are then sourced for it. If a part is no longer made, the quote explains the alternative.

Can you refinish the frame of our door in Cookstown?

Yes. Aluminium frames can be cleaned, repaired and recoated on site to refresh their colour. Badly damaged sections may need replacing rather than refinishing. Refinishing is listed separately in the quote, so you can decide whether to include it now or leave it for a later phase.

What happens once the installation in Cookstown is finished?

The engineer tests every function, including the safety sensors and the behaviour on power loss, and sets the door up with reference to BS EN 16005. You are shown how to use the controls and which simple checks to make, and you receive the handover documents, including the test record and any conformity paperwork that applies to the work.

How do you make sure the door works for disabled visitors in Cookstown?

We look at who uses the entrance: wheelchair users, people with walking aids, parents with buggies and older visitors. That shapes the opening width, the opening speed, the hold-open time and where push pads or sensors go. Service providers and employers have duties to make reasonable adjustments under equality and accessibility law, and an automatic door is a common one.

What do the building regulations in Northern Ireland say about powered doors?

The Building Regulations (Northern Ireland) 2012 require a powered door to have a means to prevent it trapping anyone and a means to open it if the power fails. Guidance on access is in Technical Booklet R, and new entrances need building control approval.

Next step

Automatic door refurbishment in Cookstown

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.