Covering Hayes and nearby
Homes, businesses and public buildings throughout the UB3 and UB4 postcode districts can arrange accessible door operators with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Hayes for the job rather than working from premises in town.
Many London entrances can only be worked on outside trading hours. For sites in Hayes, early starts, evenings and weekends can be arranged, with any extra cost set out in the written price before the job is confirmed.
Nearby towns we also list for accessible door operators (straight-line distance): Southall (2.3 miles), Greenford (3.1 miles), Uxbridge (3.4 miles), Ruislip (4.0 miles), Hounslow (4.2 miles), Feltham (4.8 miles).
What to think about for accessible door operators in Hayes
- Power is usually taken from a fused spur near the head of the door. If there is no supply close by, allow for an electrician to run one, ideally hidden in trunking or the wall.
- Check how heavy the door is to push now. If the closer is set very strong for fire or wind reasons, the operator has to be chosen to suit, and the closer may need adjusting.
- Glazed doors in shop fronts and offices in Hayes need visible push pads and clear markings on the glass, so people with sight loss can find the pad and see where the door is.
- Accessible toilets need a pad inside and out, a lock button that disables the outside pad while the room is in use, and a way for staff to open the door in an emergency.
- Place push pads where a wheelchair user can reach them without the door swinging into them. That often means mounting a pad on a post or a side wall rather than on the frame.
Accessible door operators in Hayes: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,795 to £2,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing single door, with push pads | £1,795 – £2,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for accessible door operators and book a survey in Hayes.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
From one toilet door to a whole accessible route, ask for a fixed price for accessible door operators in Hayes. The survey is free.
Accessible door operators in Hayes: questions
Our building in Hayes is listed. Can we still have an operator?
Often, yes. Low-energy operators are compact and can sometimes be mounted on the inside face, with cabling hidden. Listed building consent may still be needed for fixings or new switches, so check with the planning authority. We can supply product details for an application.
Is there a guide price for accessible door operators in Hayes?
Our guide is £1,795 to £2,995 excluding VAT (per single door), the same guide prices we use across the UK. The free site survey in Hayes confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
What if the door in Hayes is too heavy for a low-energy operator?
Some large or exposed doors need a full-energy operator with safety sensors, or a lighter replacement door, to work reliably. The survey will tell you which, and the quote explains why. Where it will work, we offer the low-energy option first because it is simpler to live with.
How soon can an operator be fitted at our premises in Hayes?
Lead time is typically 2 to 4 weeks from accepting the quote, depending on the operator and any parts the door needs. We give the expected lead time in writing with the quote, and agree the fitting date with you once the parts are ready.
What happens to the old door when a new one is fitted in Hayes?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Do I need permission from a landlord or the council before work in Hayes?
It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.
Which building regulations apply to a new automatic entrance in Hayes?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.