UK-wide · Free site survey and fixed written quote for new doors · Repair and service visits priced before we attend

Call 0800 088 6248

Automatic Door Installers

Accessible door operators · County Durham

Accessible door operators in Consett

We supply and fit accessible door operators in Consett for entrances, corridors and accessible toilets. Where the door suits it, each operator is kept within its low-energy settings, then tested and recorded at handover so you have the settings on file.

Town
Consett
Area
County Durham
Postcodes
DH8
Guide price
Typically £1,795 to £2,995 ex VAT
  • Free site survey for new doors
  • Fixed, itemised written quote
  • Set up with reference to BS EN 16005
  • England, Wales, Scotland and NI
  • Guide prices published

Covering Consett and nearby

For accessible door operators, coverage around Consett is set by postcode and includes the DH8 postcode district, as well as nearby addresses in County Durham. Specialist engineers working under our management attend each site, and the price is agreed in writing beforehand.

Doors at quieter sites in Consett and elsewhere in County Durham can go many years between checks. A safety inspection looks at how the sensors, closing behaviour and emergency functions are working, and gives you a written record to keep on file.

Nearby towns we also list for accessible door operators (straight-line distance): Stanley (5.4 miles), Chester-le-Street (10.2 miles), Durham (11.5 miles), Gateshead (11.8 miles), Newcastle upon Tyne (11.9 miles), Washington (12.9 miles).

What to think about for accessible door operators in Consett

  • If the door is a fire door, find its rating or records before the survey. Fixings and cabling must respect the rating, and the operator must release the door on the fire alarm.
  • Place push pads where a wheelchair user can reach them without the door swinging into them. That often means mounting a pad on a post or a side wall rather than on the frame.
  • Power is usually taken from a fused spur near the head of the door. If there is no supply close by, allow for an electrician to run one, ideally hidden in trunking or the wall.
  • Older public buildings in Consett often have heavy timber doors on worn hinges. Fixing the hinges and the way the door hangs before the operator goes on gives a smoother, longer-lasting result.
  • Glazed doors in shop fronts and offices in Consett need visible push pads and clear markings on the glass, so people with sight loss can find the pad and see where the door is.

Accessible door operators in Consett: guide prices

The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,795 to £2,995 ex VAT.

ItemGuide priceNotes
Low-energy operator on an existing single door, with push pads£1,795 – £2,995installed, ex VAT
Operators on an existing pair of doors£3,795 – £6,495installed, ex VAT
Touch-free switch or push pad, fitted£145 – £395per switch, ex VAT
Radio push-button kit£195 – £495buttons and receiver, ex VAT
Card or fob reader tied into the door£795 – £2,495per door, ex VAT

Standards and rules in England

Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.

Building regulations guidance in England (Approved Document M, Volume 2) says a powered opening system should be used where a self-closing entrance door would need more than 30 N at the leading edge to open, or more than 22.5 N between 30° and 60°, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.

How it works

  1. Send photos and the address. A few pictures of the door from both sides, the address in Consett and a note of who uses the entrance help us understand the job before anyone visits the site.
  2. No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
  3. Itemised quote to approve. We price every element of the work on accessible door operators separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
  4. Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.

Send us a photo of the door and tell us who uses it, and we will arrange a free survey in Consett and quote an operator to suit.

Accessible door operators in Consett: questions

Do you fit operators to accessible toilets in Consett?

Yes. An accessible toilet usually needs a low-energy operator, push pads inside and out, a lock button that stops the door opening from outside while in use, and an emergency release for staff. We price the full kit, test it with your staff and leave the settings in writing.

Is there a guide price for accessible door operators in Consett?

Our guide is £1,795 to £2,995 excluding VAT (per single door), the same guide prices we use across the UK. The free site survey in Consett confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.

Who will fit the operator at our building in Consett?

The engineer will be a specialist working under our management. We are the contracting party, so the quote, the warranty terms and any follow-up all come through us. Before handover, the door is set up, tested and documented with reference to BS EN 16005.

Can you fit an accessible operator to a door at our surgery in Consett?

Yes, in most cases. We check the door, hinges, frame and the wall above at a free survey, then quote a fixed price for the operator, push pads and any repairs needed first. Fitting usually takes half a day to a day per door, planned around your opening hours.

Do I need permission from a landlord or the council before work in Consett?

It depends on the building. Tenants usually need the landlord's written consent before changing an entrance, and some changes to a shopfront or external door need planning permission. The survey notes anything that may need consent. We can supply drawings and product details to support an application, but the owner or tenant makes it.

What does the free site survey in Consett involve?

An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for accessible door operators, with drawings where the door type needs them.

Do businesses in Consett have to fit automatic doors?

No law says every building must have automatic doors. Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, and building regulations guidance in England calls for a powered door where an entrance door would otherwise be too heavy to open. An automatic door is often the simplest way to meet both.

Next step

Accessible door operators in Consett

Send the address, a photo if you have one and what the door needs to do. New installations get a free site survey and a fixed written quote; repairs and servicing are priced in writing before we attend.