Covering Cambridge and nearby
Homes, businesses and public buildings throughout the CB1, CB2, CB3, CB4 and CB5 postcode districts can arrange accessible door operators with us. We are the contracting party and organise every visit; the engineer, who works under our management, travels in to Cambridge for the job rather than working from premises in town.
Housing providers and managing agents in Cambridge look after communal entrance doors that are used day and night. Reliable closing, good security and a written service record are usually the priorities, along with door entry or fob systems tied into the operator.
Nearby towns we also list for accessible door operators (straight-line distance): Newmarket (12.6 miles), Ely (15.1 miles), Huntingdon (15.7 miles), Haverhill (15.9 miles), St Neots (16.3 miles), Letchworth (21.1 miles).
What to think about for accessible door operators in Cambridge
- Glazed doors in shop fronts and offices in Cambridge need visible push pads and clear markings on the glass, so people with sight loss can find the pad and see where the door is.
- Place push pads where a wheelchair user can reach them without the door swinging into them. That often means mounting a pad on a post or a side wall rather than on the frame.
- Accessible toilets need a pad inside and out, a lock button that disables the outside pad while the room is in use, and a way for staff to open the door in an emergency.
- Power is usually taken from a fused spur near the head of the door. If there is no supply close by, allow for an electrician to run one, ideally hidden in trunking or the wall.
- Older public buildings in Cambridge often have heavy timber doors on worn hinges. Fixing the hinges and the way the door hangs before the operator goes on gives a smoother, longer-lasting result.
Accessible door operators in Cambridge: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: typically £1,795 to £2,995 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Low-energy operator on an existing single door, with push pads | £1,795 – £2,995 | installed, ex VAT |
| Operators on an existing pair of doors | £3,795 – £6,495 | installed, ex VAT |
| Touch-free switch or push pad, fitted | £145 – £395 | per switch, ex VAT |
| Radio push-button kit | £195 – £495 | buttons and receiver, ex VAT |
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Send photos and the address. A few pictures of the door from both sides, the address in Cambridge and a note of who uses the entrance help us understand the job before anyone visits the site.
- No-cost survey on site. We arrange a survey at a time that suits the building. The engineer records measurements, fixings and power, plus any constraints such as listed status, opening hours or access for deliveries.
- Itemised quote to approve. We price every element of the work on accessible door operators separately in a written quote that you can check, share and approve. Lead time and payment stages are stated, and nothing is ordered until you accept.
- Fit, test and hand over. On the agreed dates the engineer installs the equipment, commissions the operator and tests each safety function. You get a demonstration, the test record and any conformity paperwork that applies to the work.
Book a free survey for the door that is causing problems in Cambridge, and we will send a fixed, itemised quote for an accessible operator and push pads.
Accessible door operators in Cambridge: questions
Can you fit an accessible operator to a door at our surgery in Cambridge?
Yes, in most cases. We check the door, hinges, frame and the wall above at a free survey, then quote a fixed price for the operator, push pads and any repairs needed first. Fitting usually takes half a day to a day per door, planned around your opening hours.
Is there a guide price for accessible door operators in Cambridge?
Our guide is £1,795 to £2,995 excluding VAT (per single door), the same guide prices we use across the UK. The free site survey in Cambridge confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Our building in Cambridge is listed. Can we still have an operator?
Often, yes. Low-energy operators are compact and can sometimes be mounted on the inside face, with cabling hidden. Listed building consent may still be needed for fixings or new switches, so check with the planning authority. We can supply product details for an application.
Who will fit the operator at our building in Cambridge?
The engineer will be a specialist working under our management. We are the contracting party, so the quote, the warranty terms and any follow-up all come through us. Before handover, the door is set up, tested and documented with reference to BS EN 16005.
How much disruption should we expect while the work is done in Cambridge?
Most installations take one visit or a short series of visits, with dust and noise kept to the area around the door. The engineer screens off the work area, keeps a route in or out where possible and clears up before leaving. Larger entrances, lobbies or structural changes take longer, and the quote explains how that work is phased.
Will the building stay secure while the entrance is being changed?
We plan to keep the entrance usable or secure throughout. Where a door has to come out, the work is sequenced so the opening is closed up before the engineer leaves, or a temporary door or hoarding is arranged when a longer gap cannot be avoided. How this is handled for your site in Cambridge is agreed before work starts.
Who is responsible for automatic doors on escape routes in Cambridge?
Under the Regulatory Reform (Fire Safety) Order 2005 the responsible person for the premises must make sure escape routes work and fire safety equipment is maintained. Automatic doors on an escape route need fail-safe opening or break-out, set by the fire strategy.