Covering Maltby and nearby
Engineers working under our management travel to addresses across the S66 postcode district for access control for automatic doors. There is no depot or showroom in Maltby; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Older shopfronts are common in market towns, and some in Maltby may sit in a conservation area or a listed building. Changes to a frontage can need planning permission or listed building consent, so it is worth checking with the local planning authority before work is booked.
Nearby towns we also list for access control for automatic doors (straight-line distance): Rotherham (6.5 miles), Rawmarsh (6.7 miles), Doncaster (7.9 miles), Worksop (8.5 miles), Sheffield (11.2 miles), Chapeltown (11.7 miles).
What to think about for access control for automatic doors in Maltby
- Residential blocks in Maltby usually have a managing agent or housing provider who sets the rules for fobs, visitors and fire alarm behaviour. Involve them early.
- Healthcare sites in Maltby often control access to wards and staff areas. Think about how visitors, porters and emergency teams will get through at every hour.
- Doors on escape routes need locks that release on alarm and on power loss. Check the fire strategy, or ask your fire risk assessor, before choosing a lock.
- Think about lost cards and leavers. A system that lets you remove a card centrally is easier to run than a shared keypad code on a busy site.
- Offices on business parks in Maltby often share entrances between tenants. Agree whose system controls the door, who pays for it and who can add or remove cards.
Access control for automatic doors in Maltby: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Intercom or door entry tie-in | from £495 | priced on survey, ex VAT |
| Timed locking and night mode set-up | included with the above | programmed at commissioning |
| Electric lock added to an automatic door | on survey | depends on the door and the lock type |
Standards and rules in England
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Describe what you need. Whether the job is access control for automatic doors for a busy entrance or for a single internal door, a brief description and some photos let us understand it and plan a survey visit in Maltby.
- Free visit to the site. An engineer working under our management assesses the opening, the existing door and frame, the floor and the electrical supply, and notes any access, consent or timing issues to plan around.
- Your fixed quotation. The quote is fixed for the work it describes and lists each item, including any removal, making good and electrical work. It also states the lead time, the payment stages and the warranty terms.
- Fitting and sign-off. Work goes ahead on dates agreed with you. Once fitted, the door is adjusted and its safety functions are tested and recorded with reference to BS EN 16005, and you are shown how to use it.
Send us details of your current access control and the door in Maltby, and we will plan how to link the two.
Access control for automatic doors in Maltby: questions
Will our door in Maltby still release when the fire alarm sounds?
On an escape route, yes. Locks are wired to release on the fire alarm signal and, where the fire strategy requires it, the door opens and holds open. We test this with your fire alarm contractor at handover and record the result.
How are prices worked out for access control for automatic doors in Maltby?
Our guide starts from £795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Maltby confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Can our door in Maltby run on a schedule?
Yes. The door can open freely during opening hours and switch to card or code entry with the lock engaged at night, at weekends and on holiday dates. Staff can override the schedule with a key switch if they need to.
How long does installation take at our building in Maltby?
Lead time is typically 2 to 4 weeks from order. Most single doors are wired and commissioned in a day, though longer cable runs or several doors take more time. We agree working hours with you so the entrance stays usable.
Can automatic doors be fitted to a listed building in Maltby?
Often, yes, but listed building consent is normally needed for changes that affect the character of the building, inside or out. Slim operators, concealed fixings and automating the existing door can all reduce the visual impact. Speak to the conservation officer at the local planning authority early; we can provide drawings and specifications to help.
What do you need from us for parking and access in Maltby?
Somewhere for the engineer's van as close to the entrance as possible, and a clear working area around the door. If parking is restricted, loading rules apply or the site has security procedures, tell us when you book. Those details go into the plan so the visit is not held up on the day.
Which building regulations apply to a new automatic entrance in Maltby?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.