Covering Colwyn Bay and nearby
We do not keep premises in Colwyn Bay. Instead, enquiries about access control for automatic doors come to us, we agree the price in writing, and a specialist engineer working under our management travels to the address in the LL28 and LL29 postcode districts on a date that suits the site.
Parking on a busy high street can be tight. When work is booked in Colwyn Bay, the engineer's arrival is planned around loading restrictions, any market days and opening hours, so the visit causes as little disruption as possible.
Nearby towns we also list for access control for automatic doors (straight-line distance): Llandudno (4.8 miles), Abergele (6.0 miles), Rhyl (9.8 miles), Prestatyn (13.5 miles), Bangor (17.3 miles), Flint (24.8 miles).
What to think about for access control for automatic doors in Colwyn Bay
- Offices on business parks in Colwyn Bay often share entrances between tenants. Agree whose system controls the door, who pays for it and who can add or remove cards.
- Schools in Colwyn Bay often want a remote release at the office and a schedule for drop-off and pick-up times. Agree how the door behaves in a lockdown with your safeguarding lead.
- Doors on escape routes need locks that release on alarm and on power loss. Check the fire strategy, or ask your fire risk assessor, before choosing a lock.
- Glass entrances may not have an obvious place for a reader. A post-mounted reader, or one fitted to a side screen, can avoid drilling into the door frame.
- Cable routes matter. Running cables between a reader, a controller and the operator through finished walls and ceilings can be a large share of the cost.
Access control for automatic doors in Colwyn Bay: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Intercom or door entry tie-in | from £495 | priced on survey, ex VAT |
| Timed locking and night mode set-up | included with the above | programmed at commissioning |
| Electric lock added to an automatic door | on survey | depends on the door and the lock type |
Standards and rules in Wales
Wales has its own building regulations guidance. Approved Document M (Wales) uses a lower opening-force limit than England, 20 N at the leading edge, before a powered door is called for, and expects external doors used by the public in new buildings to give at least 1000 mm of effective clear width.
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for access control for automatic doors and book a survey in Colwyn Bay.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
Want your automatic door in Colwyn Bay to open only for the right people? Start with a free site survey, with no obligation.
Access control for automatic doors in Colwyn Bay: questions
Our automatic door in Colwyn Bay is quite old. Can access control still be added?
Sometimes. Older operators may not have suitable inputs, or may not support an electric lock. The survey checks this, and if the operator needs upgrading first, the quote shows the cost of both, so you can decide. An older door may also benefit from a safety inspection at the same time.
What is the guide price for access control for automatic doors in Colwyn Bay?
Our guide starts from £795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Colwyn Bay confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Will our door in Colwyn Bay still release when the fire alarm sounds?
On an escape route, yes. Locks are wired to release on the fire alarm signal and, where the fire strategy requires it, the door opens and holds open. We test this with your fire alarm contractor at handover and record the result.
Do you work with our security installer in Colwyn Bay?
Yes. Where a security installer already looks after your access control, we usually handle the door, the lock and the link to the operator, and they handle the reader, controller and permissions. The quote sets out who does what so nothing falls between the two.
What does the free site survey in Colwyn Bay involve?
An engineer working under our management visits the building, measures the opening, checks the frame, floor, head height and power supply, and looks at how people use the entrance. The survey is free and carries no obligation. Afterwards you receive a fixed, itemised written quote for access control for automatic doors, with drawings where the door type needs them.
What happens to the old door when a new one is fitted in Colwyn Bay?
If the work replaces an existing door, frame or operator, removal and disposal are listed in the quote. The old door comes out only when the new one is ready to go in, so the opening is not left empty for longer than necessary. Making good to the surrounding wall, floor or ceiling is included where the quote says so.
Who is responsible for automatic doors on escape routes in Colwyn Bay?
The responsible person under the Regulatory Reform (Fire Safety) Order 2005. Automatic doors on an escape route need fail-safe opening or break-out, and sliding or revolving doors must not be used for exits specifically intended as emergency exits.