Covering Bedford and nearby
Engineers working under our management travel to addresses across the MK40 and MK41 postcode districts for access control for automatic doors. There is no depot or showroom in Bedford; you arrange everything with us by phone, email or the form on this page, and we confirm the price in writing first.
Council offices, libraries, leisure centres and other public buildings in Bedford usually buy through procurement rules. Itemised written prices, method statements and the paperwork a buyer needs can all be provided, and the work is carried out by specialist engineers working under our management.
Nearby towns we also list for access control for automatic doors (straight-line distance): Kempston (1.9 miles), St Neots (10.2 miles), Rushden (12.1 miles), Milton Keynes (13.9 miles), Letchworth (14.8 miles), Hitchin (14.9 miles).
What to think about for access control for automatic doors in Bedford
- Healthcare sites in Bedford often control access to wards and staff areas. Think about how visitors, porters and emergency teams will get through at every hour.
- Decide how the door should behave at each time of day before the survey. Opening hours, cleaning shifts, deliveries and weekend events all affect the schedule the door will follow.
- Glass entrances may not have an obvious place for a reader. A post-mounted reader, or one fitted to a side screen, can avoid drilling into the door frame.
- Cable routes matter. Running cables between a reader, a controller and the operator through finished walls and ceilings can be a large share of the cost.
- Schools in Bedford often want a remote release at the office and a schedule for drop-off and pick-up times. Agree how the door behaves in a lockdown with your safeguarding lead.
Access control for automatic doors in Bedford: guide prices
The site survey is free, including the measured drawing and a fixed, itemised written quote. Guide price: from £795 ex VAT.
| Item | Guide price | Notes |
|---|---|---|
| Card or fob reader tied into the door | £795 – £2,495 | per door, ex VAT |
| Intercom or door entry tie-in | from £495 | priced on survey, ex VAT |
| Timed locking and night mode set-up | included with the above | programmed at commissioning |
| Electric lock added to an automatic door | on survey | depends on the door and the lock type |
Standards and rules in England
Whoever motorises a manual door, or builds an automatic door from separate parts, may take on the manufacturer’s legal duties for the finished door: a risk assessment, a technical file kept available for the authorities, a Declaration of Conformity, the conformity marking and instructions. You receive the Declaration of Conformity and the instructions at handover. In Great Britain a new or converted powered door must meet the Supply of Machinery (Safety) Regulations 2008 before it is first used, and can carry the UKCA or the CE marking.
Under the Equality Act 2010, service providers and employers must make reasonable adjustments for disabled people, which can include altering a physical feature such as a heavy entrance door. Fitting an automatic door helps, but does not on its own guarantee those duties are met.
How it works
- Tell us about the entrance. Send the address, a few photos and a rough size of the opening, and say how the door is used. That is enough for us to suggest options for access control for automatic doors and book a survey in Bedford.
- Free site survey. A specialist engineer working under our management measures the opening, checks the frame, floor, head height and power, and talks through how people use the entrance. There is no charge and no obligation.
- Fixed written quote. You receive a fixed, itemised written quote with the specification, lead time, payment stages and warranty terms. The price does not change unless the scope does, and any change is agreed in writing first.
- Installation and handover. The door is fitted on the agreed dates, then set up, tested and documented with reference to BS EN 16005. You are shown the controls and the simple checks to make, and receive the handover paperwork.
From a single keypad to readers on every entrance, get a written quote for access control in Bedford, starting with a free survey.
Access control for automatic doors in Bedford: questions
Will our door in Bedford still release when the fire alarm sounds?
On an escape route, yes. Locks are wired to release on the fire alarm signal and, where the fire strategy requires it, the door opens and holds open. We test this with your fire alarm contractor at handover and record the result.
Can you give me a price for access control for automatic doors in Bedford?
Our guide starts from £795 excluding VAT (per door), the same guide price we use across the UK. The free site survey in Bedford confirms the price as a fixed, itemised written quote, and the guide price tool gives you a range before anyone visits.
Our automatic door in Bedford is quite old. Can access control still be added?
Sometimes. Older operators may not have suitable inputs, or may not support an electric lock. The survey checks this, and if the operator needs upgrading first, the quote shows the cost of both, so you can decide. An older door may also benefit from a safety inspection at the same time.
How long does installation take at our building in Bedford?
Lead time is typically 2 to 4 weeks from order. Most single doors are wired and commissioned in a day, though longer cable runs or several doors take more time. We agree working hours with you so the entrance stays usable.
What power supply is needed for access control for automatic doors in Bedford?
Most powered doors need a fused spur close to the operator, and some activation and access control devices also need a low-voltage link. The survey checks what is already there. If a new supply is required, the quote says whether we arrange it or your own electrician does, so nothing is left unclear on the day.
Do you service doors in Bedford after installing them?
Yes. We recommend a trained engineer checks the safety functions at least once a year, with service intervals set by the manufacturer's instructions and how heavily the door is used; busy doors are often serviced more often. Servicing can follow on from the installation, with the price agreed in writing and a record left after every visit.
Which building regulations apply to a new automatic entrance in Bedford?
In England the guidance is Approved Document M (Volume 2) for access, Approved Document B for fire safety and escape routes, and Approved Document K for glazing and powered doors. A new entrance can count as building work, so building control should be involved before it is ordered.